####################################################
#
#  EAC Language Translation File
#
#  Copyright 2003 by Andre Wiethoff
#
#####################################################


# Please read these comments before you actually change
# anything in this file (or create a new translation 
# based on it). It contains many hints and explanations
# how such a file has to look like.
# First of all, you have probably noted that everything
# in this file after a '#' character will be ignored
# (and can be used as a comment).
# Of course, you don't need to translate any of the
# comments.

# Next important issue is that all language strings have
# an unique and identifying number to which the string
# is assigned.
# If a number is assigned to a different number, the 
# text of the second number (right side of the equal
# character) is assigned to the number on the left.
# That way, a translation has to be performed only once
# and is copied into a different resource location.
# Usually these lines with two numbers don't need to
# be changed.

# The next question is, what should be translated how.
# Some words are a kind of keywords that MAY NOT
# translated in these files. A second list contains
# words that SHOULD NOT be translated (if anyhow 
# possible)
#
# List of words that MAY NOT be translated :
# (Of course also words that are based on these words)
#
#    Offset
#    Sample
#    CRC
#    Lead-In
#    Lead-Out
#    UPC
#    ISRC
#    CUE Sheet
#    BurnProof
#    ID3 Tag
#    EAC
#    Exact Audio Copy
#    LAME
#    freedb
#    BladeEnc
#    SatCP
#    Session
#    CD-TEXT
#    CDPLAYER.INI
#    ASPI
#
# List of words that SHOULD NOT be translated :
#
#    Track
#    Index
#    CD
#    Burst
#    Pop
#    Glitch
#    FAQ
#    Image   (CD Image)
#    Native  (ASPI Interface)
#    Interpolate
#    Flange
#    Zoom

# The strings that are assigned to the numbers are
# quite easily constructed. All assignments have the
# following look: either
# <number> = <number>
# or
# <number> = <string>
# The first case was already explained; the text from
# the second number will be copied to the first.
# The common case is that a string is assigned that
# needs to be translated.
# A <String> is based on a specific structure, each
# <String> starts and ends with a '"' character; e.g.,
# "This is a test" is a string. If a string is too
# long to fit in a line, it is possible to concat two
# strings into one -- e.g.
# "This is "+
# "a test" 
# will result in the string "This is a test". Please 
# note that the line has to end after the '+' 
# character. And also please note that the <space>
# (empty character) in the first line is necessary,
# as otherwise the string would result in 
# "This isa test".
# In some strings, there are <spaces> at the beginning
# or at the end of the string. Please keep the exact
# number of spaces at that position; e.g. change
# "  This is a test " only to "  Dies ist ein Test ".
# If a string needs to contain the character '"', a
# special code has to be used, as '"' would tell that
# the string is finished. So, whenever the string
# needs the character '"' use the code '\"' instead --
# e.g. "This is a \"test\" file"
# Some strings (for some dialogs) have a '\n' code
# in it. This stands for a carriage return. This is
# only possible within special messages, so when a
# string does not contain such a character, please
# do not add one. It will most probably not work out
# as expected; e.g.
# "This is\n\na test" would look like this:
# This is
#
# a test
# Usually two '\n' codes are used in the strings to
# make such dialogs more easy to read. If there are
# such codes at the end or at the beginning of a 
# string, please also keep these codes untouched.

# The resources are sorted by dialogs and menus as far
# as possible, but at the end of the file, there is a
# list of all other resource strings that were not
# sorted directly into a dialog.
# Please do not change the order of the resource
# numbers, this is important for future updates of
# EAC.

# If there are special needs for information on a
# specific resource, there will be more comments on
# that topic.

# Now, you know all you need to translate this file
# into your language. If you make a mistake, EAC
# will show an error message with the erroneous line
# specified with the exact type of error.
# You should test your translation in small pieces:
# translate e.g. a dialog and then test the translation
# by starting EAC on errors, and that all texts
# are fitting in the reserved space for each resource.
# Also spell-check all your translated texts directly
# in the appropriate dialog. If you don't know exactly
# how to translate a given string, you can have a look
# at the other language definition files that come
# with this EAC.



####################################################
# EAC General Resources
####################################################

# Please enter here your name that will be shown in
# the EAC About dialog. Translate the rest of the
# line also into your language

    98 = "Translated by Andre Wiethoff"

# Please change the given email address here to your
# email address, so you can be addressed if an error
# in the translation was found.

    99 = "E-Mail : eac?exactaudiocopy.de"

# This is the name of your language in your own
# language

     1 = "English"

# This is the name of your language in the english
# language

     2 = "English"

# This is the code that is displayed by the program
# showinfo.exe that comes with this SDK. It is the
# locale information from the windows system
# installed on your computer.

     3 = "0409"

# This is the second code number that is shown by
# the showinfo.exe program. It identifies a specific
# language and should be unique for each language.

     4 = "47AB3DF2"

# The following strings are very common strings that
# are used very often in the dialogs etc.

     5 = "Error Message"
     6 = "Warning"
     7 = "Success"
     8 = "Information"

    10 = "OK"
    11 = "Cancel"
    12 = "Apply"
    15 = "Yes"
    16 = "No"

    31 = "Filename will be ignored"
    50 = "Value out of range !"
    51 = "Invalid characters !"
    52 = "Invalid filename !"

    40 = "1.0b3-002"

####################################################
# EAC Options - Extraction Tab
####################################################

  4200 = "Extraction"

  4310 = " Fill up missing offset samples with silence "
104310 = "When using offset correction without the "+
         "drive being able to overread into lead-in/lead-out, "+
         "this flag specifies if the missing samples should be "+
         "filled with silence or just left out, resulting "+
         "in a WAV file with some missing samples."

  4308 = " No use of null samples for CRC calculations "
104308 = "This flag specifies if silence is used for "+
         "checksum calculations as well. Having silence "+
         "at the beginning and the end could make CRC "+
         "comparisons the same even if a different read "+
         "offset was used."

  4202 = " Synchronize between tracks "
104202 = "At track junctions EAC can synchronize between "+
         "the two tracks, making sure that no pops/gaps will "+
         "occur in these junctions. This works, of course, only "+
         "if adjacent tracks are extracted."

  4203 = " Delete leading and trailing silent blocks "
104203 = "EAC will cut off any digital silence before and "+
         "after all tracks (and ranges) that are extracted, "+
         "resulting in a file with length shorter than the original."

 13701 = " Skip track extraction on read or sync errors "
113701 = "If selected, EAC will, on the first occurrence of "+
         "a read or sync error, skip the current track and "+
         "proceed with the next one."

 13702 = " Skip track extraction after duration longer than "
113702 = "If selected, EAC will, after extracting a track for a "+
         "given amount of time, skip the track and proceed with "+
         "the next one. This is handy if error correction takes "+
         "too long, making error-free extraction nearly unfeasible."
  4230 = "times realtime"

  4210 = " After each "
104210 = "On difficult, error-filled extractions, it is often a good "+
         "idea to pause the extraction after a specific time interval "+
         "in order to prevent any damage to the CD-ROM drive."
  4211 = "mins of extraction, cool down the drive for"
  4214 = "mins"

  4215 = " Lock drive tray during extraction"
104215 = "EAC will lock the CD-ROM drive tray to make "+
         "sure that the user doesn't open it by accident "+
         "during the extraction process. If not selected, "+
         "the tray could open during an extraction, "+
         "leaving EAC in an unknown state."

  4208 = "Extraction and compression priority"
104205 = "This is the Windows priority used for extraction and "+
         "compression. If you select a priority higher "+
         "than Normal, EAC will work in the background "+
         "without any speed sacrifices while the user "+
         "works in another application."

  4232 = "Error recovery quality"
107602 = "There are three levels of error correction, also "+
         "visible in the number of error-display rows in the "+
         "extraction dialog. This only specifies how many "+
         "rereads will be done before giving up."

  4233 = "A higher error recovery quality will slow "+
         "down extraction on read and sync errors."

  4270 = "Low"
  4271 = "Medium"
  4272 = "High"

  4280 = "Idle"
  4281 = "Normal"
  4282 = "High"

  4290 = 50
  4291 = 51



####################################################
# EAC Options - General
####################################################

  4300 = " General "

  4312 = " Use alternate CD play routines "
104312 = "When this is selected, all CD play routines will work by "+
         "extracting and digitally sending the audio data "+
         "to the sound card. This has the advantage that no "+
         "cable has to be installed between the drive and "+
         "the soundcard."

  4307 = " Disable 'CD Autostart' for audio and data CDs while EAC running "
104307 = "EAC will disable the Windows CD Autostart feature so that "+
         "when a new CD is inserted, Windows will not launch the "+
         "Windows CD Player or start the setup program of the CD."

  4321 = " On unknown CDs, "
104321 = "If a CD is inserted for which EAC has no information "+
         "stored, EAC can automatically take the following actions."

  4317 = " automatically access online metadata database "
104317 = "The Internet CD database will be queried automatically "+
         "if an unknown CD is inserted. Of course, the EAC Internet "+
         "options must be set correctly beforehand."

  4318 = " open CD information dialog "
104318 = "On an unknown CD, EAC will pop up its CD information "+
         "dialog, wherein the user can easily enter all "+
         "necessary CD information."

  4309 = " Display times using frames "
104309 = "It is possible to display the time information in the "+
         "main window in two different formats: either as hundredths "+
         "of seconds or as 1/75 seconds (frames), which are more native "+
         "to the CD. The frame display is always exact, whereas "+
         "hundredths of seconds will be rounded."

  4302 = " Ask before overwriting files "
104302 = "If a file already exists with the same filename as the track "+
         "to be extracted from the CD, EAC can ask if the file should "+
         "be overwritten or just overwrite it without asking."

  4319 = " Correct bug of wrong filename order in Windows multiple file dialog "
104319 = "The Windows file selection box has a strange behavior that "+
         "occurs when selecting multiple files, in which the first and "+
         "last selected tracks are exchanged. This function will "+
         "correct this by exchanging both files again."

  4306 = " Show status dialog after extraction "
104306 = "Here you can select if, after extraction, EAC should "+
         "show the Extraction Status dialog with information on "+
         "read errors and quality."

  4303 = " Beep after extraction finished "
104303 = "After extraction is finished EAC can perform a Windows beep."

  4304 = " Eject CD after extraction finished "
104304 = "It is possible to eject the CD automatically after "+
         "extraction is finished."

  4320 = " On extraction offer the possibility to "
104320 = "EAC can shut down or reset the computer "+
         "automatically after it has finished an extraction."

  4314 = " shut down computer "
104314 = "If selected, EAC will shut down the computer after "+
         "an extraction has finished."

  4315 = " restart computer "
104315 = "If selected, EAC will reset the computer in order to "+
         "start up anew with a clean environment."

  4316 = " hibernate computer "
104316 = "If selected, EAC will let the computer hibernate "+
         "(Hibernation - S4 Sleep State), so that it can be "+
         "started up again very fast."

  4406 = " wait for external compressors "

  4322 = " Create log files always in english language "
104322 = "For exchanging extraction log files with people from various "+
         "countries, it would be helpful if these log files are always "+
         "written in english language indepently of the choosen language "+
         "for the rest of the EAC application."


####################################################
# EAC Options - Tools
####################################################

 13700 = " Tools "

  9505 = " Retrieve UPC / ISRC codes in CUE sheet generation "
109505 = "On automatically generating a CUE sheet for a CD, "+
         "it is possible to add also its UPC and ISRCs. On the "+
         "other hand, this could be quite time-consuming on some CDs."

  4209 = " Use CD-Text information in CUE sheet generation "
104209 = "Add PERFORMER and TITLE to CUE sheets that are created. "+
         "If the program and writer support CD-Text, these data will "+
         "be written automatically to the CD. These data are taken "+
         "from the main window and from the CD Information dialog."

 13705 = " Create '.m3u' playlist on extraction "
113705 = "If selected, EAC will automatically write an '.m3u' playlist to "+
         "the chosen directory, with its filename generated from the CD name. "+
         "Only tracks selected for extraction will be listed in this file."

 13716 = " Write m3u playlist with extended information "
113716 = "A few players will read extended information from the "+
         ".m3u file, including length, title, and more. These "+
         "additional data are inserted as comments; nevertheless, "+
         "some players do not like comments in the playlist, so "+
         "you can disable this feature for compatibility reasons."

 13717 = "  Write m3u playlist as UTF8 file (compatible e.g. with Winamp) "
113717 = "This will enable EAC to write the m3u playlist as UTF8 encoded "+
         "file. That way, all Unicode characters can be used for the "+
         "included filenames and titles - otherwise Multichar will still "+
         "be used. The disadvantage of UTF8 m3u files is that some players "+
         "will not accept them, so test beforehand whether your player "+
         "supports UTF8 encoded m3u files."

 13706 = " Automatically write status report after extraction "
113706 = "After extraction has finished, it is possible to automatically "+
         "save the status information to a file, with the filename generated "+
         "from the CD title."

 13718 = " Append checksum to status report "
113718 = "Sometimes it might be necessary or wanted to be able to check the "+
         "integrity of the log files, to make sure that all values and "+
         "CRC checksums are unmodified (e.g. by bad media). If this flag is "+
         "set, EAC will write a checksum over the log information at the end "+
         "of each log. With the help of a tool that comes with EAC it is possible "+
         "to verify the log information within a given log file." 
         
 11409 = " Convert BMP image files automatically to JPG "
111409 = "If a cover image of the BMP format (which is uncompressed, "+
         "thus usally very large) is loaded (or drag'n'dropped), EAC "+
         "will compress it with a high quality JPG compression. This "+
         "flag allows EAC to use and store the JPG instead of the BMP "+
         "image file, but only if the JPG is 20% smaller than the "+
         "original file. If the file is not BMP, always the original "+
         "file is stored by EAC, independend of its size."

 13707 = " On extraction, start external compressors queued in the background "
113707 = "Using this flag will let EAC do all compression during extraction "+
         "using external command-line encoders in a queue at the same time "+
         "as the extraction. As compression will work beside extraction, "+
         "this could result in some problems. First of all, on slow computers, "+
         "extraction could be more problematic, as errors could occur more "+
         "often or be more severe. Second, when using external command-line "+
         "encoders, in the worst case the whole CD is extracted as WAV, so "+
         "up to 700 MB free space could be needed, unlike compression without "+
         "this option, in which case the next track is extracted when the "+
         "previous track has finished compression (and can be deleted)."

 13712 = "Use"
 13710 = "simultaneous external compressor thread(s)"
 13714 = "It is necessary to restart EAC to change the number of compression threads."

 13709 = " Do not open external compressor window "
113709 = "For an external command-line encoder, EAC will usually open "+
         "a new window showing the progress of the encoder. Using this "+
         "option, no new window is opened for status messages, and thus "+
         "no conflicts with other applications occur. On the other hand, "+
         "you won't know how much of a file still needs to be encoded."

 13708 = " Submit drive features after detection (but ask for permission) "
113708 = "To help other users who lack matching offset CDs or have other "+
         "problems in determining their drive features, EAC can submit "+
         "drive feature data to a central database. If this flag is "+
         "selected, EAC will ask if it is allowed to submit these data. If "+
         "this flag is not selected, EAC will not ask nor send any data."

 13715 = " Activate beginner mode, disable all advanced features "
113715 = "EAC is a very complex tool that requires knowledge of the "+
         "structure of audio CDs in order to exploit all its features. "+
         "As beginners often worry which options are really necessary "+
         "to be set in order to get good results, EAC can hide "+
         "options that should only be used by experts and are not "+
         "necessary for good copies of audio CDs.");

 13780 = "Setting the beginner mode will reset some other options "+
         "to their default value !\n\nDo you want to continue ?"



####################################################
# EAC Options - Normalize
####################################################

  4100 = "Normalize"

  1512 = " Normalize "
101512 = "Normalizing a track means to change its volume to a given "+
         "maximum loudness. 100% means that the song (in the file) will "+
         "be as loud as possible without clipping (0 dB), and 25% means "+
         "that the volume will be only a fourth of the maximum possible "+
         "loudness (-12 dB). This can be handy to bring all songs of a "+
         "sampler to the same maximum loudness, but could also destroy "+
         "the dynamic effects intended by a composer or producer."

  1510 = "Normalize to"
101504 = "This is the level of normalization. 100% is the maximum value. "+
         "Usually for maximum loudness a few percent lower value is "+
         "taken to prevent clipping by the output devices."

  1513 = "But only if Peak Level is"
  1518 = "smaller than"
101514 = "Here you can choose for which tracks normalization should be "+
         "performed. It should be done if a track has a low maximum volume. "+
         "All tracks with a volume below this value will be normalized."

  1555 = "or"

  1520 = "greater than"
101516 = "Here you can choose for which tracks normalization should be "+
         "performed. It should be done if a track has an extremely high "+
         "maximum volume. All tracks with a volume higher than this "+
         "value will be normalized."



####################################################
# EAC Options - Filename
####################################################

  4400 = "Filename"

  4460 = "Construction of save filenames"

  4420 = "Naming scheme"
104488 = "In this field you can specify how the filename of an "+
         "extracted track is constructed. By choosing placeholders "+
         "for properties of the CD you can create any filename "+
         "you want. Of course you can also use additional text, "+
         "and you can specify a '\\' to tell that it should be in "+
         "a subdirectory. If the subdirectory does not exist, "+
         "it will be created. There is a limitation that you can't "+
         "specify an absolute position (e.g. 'C:\\directory\\%title%' or '\\%title%'). "+
         "Please note that for normal extractions either "+
         "<Track title>  OR  <Track number> is mandatory, for "+
         "index-based extractions <Track number> is mandatory."

  4421 = " Use various artist naming scheme "
104421 = "It is possible to use an alternative naming scheme on CDs "+
         "with various artists. When selected, the naming scheme will "+
         "be used on these CDs instead. Of course the appropriate "+
         "option in the CD information has to be set."

104423 = "On various artist CDs an alternative naming scheme may "+
         "be used. The parameter has the same conventions as the "+
         "normal naming scheme."

  4401 = "- Track title"
  4430 = "- Track number (at least 1 digit)"
  4404 = "- Track number (at least 2 digits)"
  4431 = "- Track number (at least 3 digits)"
  4402 = "- Track artist"
  4440 = "- Track artist"
  4441 = "- Track composer"
  4442 = "- CD composer"
  4443 = "- CD performer"
  4444 = "- CD comment"
  4445 = "- Total number of tracks on the CD"
  4446 = "- Track number (continued from last CD)"
  4447 = "- freedb ID"
  4448 = "- Number of the CD within a set"
  4449 = "- Number of CDs in a set"
  4450 = "- CRC value for the track"
  4403 = "- Release year"
  4405 = "- CD title"
  4413 = "- ID3 music type"
  4414 = "- freedb music type"
  4425 = "- CD artist"
  4427 = "- freedb ID"
  4436 = "- Track duration (minutes part)"
  4437 = "- Track duration (seconds part)"

  4412 = "For example : "

  4411 = " Replace spaces by underscores "
104411 = "If selected, all spaces in filenames that are created "+
         "will be replaced by underscores ('_')."

  4418 = "Note :"
  4419 = "For normal extractions either "+
         "<Track title>  OR  <Track number> is mandatory."
  4422 = "For index-based extractions only <Track number> "+
         "is mandatory."

  4466 = 52


####################################################
# EAC Options - Replacements
####################################################

 16400 = "Character Replacements"

 16401 = "Replace the following characters in filenames by the given replacement strings"

116420 = "The Windows filesystem does not allow filename to contain all possible "+
         "characters, some characters are used for special purposes (e.g. : and \\ are used "+
         "for specifing drives and directories). So if EAC creates a filename "+
         "(e.g. from artist and track information) automatically, it might contain such "+
         "characters. Here it is possible to specify replacements for each forbidden character "+
         "(where the replacement may be several characters). Further some more slots "+
         "are available for used defined replacements."
 
 16440 = "Invalid replacement character!\n\nThe characters \", \\, /, :, ?, *, <, > and | "+
         "may not be used!  "



####################################################
# EAC Options - Audio Plugins
####################################################

 19100 = "Audio Plugins"

 19101 = "Available audio processing plugins"

119103 = "It is possible to extend the functionality of EAC by using "+
         "plugins. These plugins could perform a lot a tasks, e.g. "+
         "calculate checksums, analyse the audio data, "+
         "bind metadata with audio data for compression or to send "+
         "information to internet databases. Every single plugin "+
         "can be activated (or deactivated) in this form by setting or "+
         "removing the checkmark. At the moment, EAC is coming without "+
         "any plugins, but this could change in the future."

 19102 = "Show the options of the selected audio processing plugin"
119102 = "Every plugin posses depending on its needs an individual option "+
         "screen. This button will call the options screen of the selected "+
         "plugin, this screen does not belong to EAC itself."



####################################################
# EAC Options - Catalog
####################################################

  3900 = "Catalog"

  3907 = "Catalog file length (in seconds)"
103903 = "If creating catalog sample pieces, this will specify "+
         "the total length in seconds of each sample piece."

  3911 = "Catalog start position in a track (in seconds)"
103909 = "This is the position in seconds in the track where "+
         "the catalog sample piece should start.");

  3912 = "Fade in length (in seconds)"
103910 = "The catalog sample piece will be faded in for this "+
         "length in seconds."

  3908 = "Fade out length (in seconds)"
103902 = "A fade out will be done to the catalog sample pieces "+
         "for this length in seconds.");

  3940 = "No number !"
  3941 = "Fade time greater than total length !"



####################################################
# EAC Options - Directories
####################################################

 12900 = "Directories"

 12901 = "Standard directory for extraction"

 12902 = " Ask every time (default showing last used directory) "
112902 = "If this is selected, EAC will ask for the "+
         "destination directory of all extractions."

 12903 = " Use this directory "
112903 = "You can specify a directory to where all extractions are "+
         "targeted."

112904 = "This base directory will be used for extracting all tracks."

 12905 = "Browse..."
112905 = "Browse for a directory as a target of upcoming extractions."

 12906 = "EAC language selection"
 12907 = "Use language"
112908 = "It is possible to have EAC localized in your own language. "+
         "All texts within EAC are translated for easier access to most "+
         "functions for persons unfamiliar with the English language. " +
         "If your language is not listed here, perhaps the translation is "+
         "in progress. Look on the EAC page for recent translations."


####################################################
# EAC Options - Write
####################################################

 13500 = " Write "

 13501 = "CD-Text options"

 13502 = " Upper all characters (on writing) "
113502 = "If selected, all characters of the title and artist of the "+
         "CD-Text information are made upper case."
 13504 = "e.g.  \"Queen\"  becomes  \"QUEEN\""

 13503 = " Include artist in the CD-Text track title entry (on writing) "
113503 = "The artist will be included in the title of the CD-Text "+
         "information, as some standalone CD players will display only "+
         "the title and not the artist field."
 13505 = "e.g. \"Bohemian Rhapsody\"  becomes  \"Queen - Bohemian Rhapsody\""

 13506 = " Disable copy protection flag on adding audio files to the "+
         "layout editor by default "
113506 = "This flag will disable the copy protection flag by default "+
         "for all added tracks in the write layout editor. But you may "+
         "still change the settings in the layout editor."

 13507 = " Use CDRDAO for writing in the EAC layout editor "
113507 = "EAC can use its internal writing routines for burning, "+
         "or it can call an external application called CDRDAO. The advantage "+
         "of CDRDAO lies in the better support of older and newer CD-R drives. "+
         "On the other hand, EAC's routines are internal, making them basically "+
         "a little bit more stable. In both cases write offset correction will "+
         "be performed."


####################################################
# EAC Options - Interface
####################################################

 13300 = "Interface"

 13301 = "Use of SCSI interface"

 13302 = " Installed external ASPI interface "
113302 = "An external SCSI/IDE interface, called ASPI, will be used. "+
         "For best compatibility you should use the one from Adaptec."

 13306 = " Installed external ASAPI interface (from VOB software) "
113306 = "EAC also supports a different SCSI interface by the third-party "+
         "manufacturer VOB. This interface should be able to handle "+
         "IDE, SCSI, USB, Parallel, and Firewire devices."

 13303 = " Native Win32 interface for XP/Vista/Win 7 "
113303 = "The SCSI/IDE interface used will be the one provided by EAC. "+
         "This works only for Windows XP and newer, "+
         "this is the recommended setting."

 13304 = "After changing these settings, EAC must be restarted in "+
         "order for the new settings to take effect."

 13307 = "Note :"
 13305 = "The external ASPI interface is installed by default in some "+
         "Windows versions (Windows 95/98/ME). It can also be downloaded "+
         "from http://www.adaptec.com/ but some install programs check "+
         "if you have Adaptec hardware installed in your computer."
 13308 = "The external ASAPI interface is part of VOB's Instant CD/DVD "+
         "package, but can be downloaded for free. "+
         "There shouldn't be incompatibilities with other ASPI installations."



####################################################
# Drive Options - Extraction Method
####################################################

  7500 = "Extraction Method"

  7503 = "Secure modes"

  1505 = " Secure mode with following drive features (recommended)"
101505 = "If one of these secure modes is selected, the extracted "+
         "audio is checked for correctness and if errors occur, "+
         "EAC will try to recover them. It is important that the "+
         "correct settings are used below."

  7501 = " Drive has 'Accurate Stream' feature "
107501 = "This option should be set if your drive has an accurate stream, "+
         "meaning that it won't jitter, thus no jitter-correction has "+
         "to be performed anymore. Your drive's support for this feature "+
         "can be tested using the function at the bottom."

  7502 = " Drive caches audio data "
107502 = "If your drive caches the audio that was just read, "+
         "it would be a problem to read this data again in order "+
         "to compare both extractions to find out if they match. "+
         "In that case this option has to be enabled, so that EAC will "+
         "clear the cache by overreading it. Your drive's support for "+
         "this feature can be tested using the function at the bottom."

  7506 = " Drive is capable of retrieving C2 error information "
107506 = "Some newer drives can return C2 error information "+
         "in addition to the normal audio data. In that case EAC "+
         "doesn't need to read all data twice anymore, resulting "+
         "in a big speedup. But beware: in the drive feature detection, "+
         "some drives will report that they support C2 when they "+
         "actually do not. To test this feature more thoroughly, "+
         "there is an additional function at the bottom."

  7509 = " Use C2 error information for error correction"
107509 = "For some kinds of defective CDs, enabling this option "+
         "can result in better-sounding copies, but this will "+
         "only work correctly when the reader's C2 routines are "+
         "correct. In most cases you should leave this option "+
         "unselected."

  1507 = " Paranoid mode (not recommended)"
101507 = "This is the oldest secure mode of EAC. It reads and "+
         "rereads the sectors in smaller blocks. This decreases "+
         "performance and could perhaps damage your drive, so this "+
         "mode is not recommended, but some users claim to get "+
         "better results using this mode."

  7508 = " Disable CD-ROM drive cache "
107508 = "The cache of the drive will be disabled, but beware "+
         "because this option could produce some strange noises with "+
         "some drives. In that case do not use this option anymore!"

  7504 = "Synchronized modes"

  1506 = " Fast mode"
101506 = "Fast mode is a standard synchronized extraction mode, "+
         "called 'normal', 'synchronized' or 'jitter-corrected' mode "+
         "in other programs. This non-secure mode should be used "+
         "if your drive does not support accurate stream."

  7505 = "Burst modes"

  1525 = " Burst mode"
101525 = "Burst mode is the fastest mode available. The audio "+
         "sectors are just read without any error detection or "+
         "error correction. On some badly scratched CDs, this mode "+
         "could result in better copies than secure mode "+
         "(at least with some drives)."

  7601 = "Detect Read Features..."
107601 = "EAC can autodetect most drive features using this function. "+
         "This is needed for making sure that the correct secure "+
         "mode options are selected."

  7507 = "Examine C2 Feature..."
107507 = "Some drives report that they support C2 error information, "+
         "but in fact they don't. This function will scan a scratched "+
         "CD for occurrence of any C2 report. If there is none, most "+
         "probably the drive does not support the C2 feature."



####################################################
# Drive Options - Drive
####################################################

  9900 = "Drive"

  9924 = "Drive read command"

104207 = "As there was no real drive standard, most manufacturers had "+
         "their own commands used for extracting audio from a CD. "+
         "Because of this EAC knows a lot of read commands and usually "+
         "EAC will autodetect the correct one. But there may be "+
         "problems in autodetecting the read command; in that case you "+
         "can try to select the correct read command manually, then "+
         "check with burst copy if you really have selected the correct one."

  9925 = "A wrongly chosen extraction command may cause "+
         "problems on SCSI systems."

  9901 = "Autodetect read command now"
109901 = "EAC will autodetect the read command when this function "+
         "is used, and the result will be set in the combo box afterwards."

  7605 = " \"Big Endian\" byte order (Motorola) "
107605 = "Some drives will return samples in the wrong byte order. "+
         "16-bit samples can be divided into 2 bytes, and the "+
         "order of the bytes is reversed on these drives. "+
         "If your extracted music sounds like pure noise, try "+
         "to use this option."

  9927 = "This \"Big Endian\" byte mode is often used on drives from "+
         "Philips, Grundig, IMS, Kodak, Ricoh, HP, Plasmon and some "+
         "others. Select this option only if the extracted wav file "+
         "seems to consist of noise!"

  7607 = " Swap channels "
107607 = "A few (bad) drives swap the left and right stereo "+
         "channels; such behavior can be undone using this option. "+
         "Even fewer drives will swap channels "+
         "several times during the extraction process."

  9926 = "Very few drives will have exchanged stereo channels "+
         "on extraction."

  7610 = " Spin up drive before extraction "
107610 = "Some drives begin to transmit data while the drive is just "+
         "spinning up. This could result in problems at the beginning "+
         "of the extraction. To make sure that the drive is at full "+
         "spin, you could activate this option.";

  7609 = "Some drives already read data on spin up. This will "+
         "cause problems on some of these drives, destroying the "+
         "beginning of an extracted WAV."

  9950 = "Autodetect read command"
  9951 = "Read command MMC"
  9952 = "Read command Read10"
  9953 = "Read command Density"
  9954 = "Read command D8"
  9955 = "Read command D5"
  9956 = "Read command D4"
  9957 = "Read command MMC 1"
  9958 = "Read command MMC 2"
  9959 = "Read command MMC 3"
  9960 = "Read command MMC 4"
  9961 = "Read command D4 1"
  9962 = "Read command D4 2"

  9980 = "Drive does not contain a music CD"



####################################################
# Drive Options - Offset / Speed
####################################################

  7600 = "Offset / Speed"

  7606 = " Use read sample offset correction"
107606 = "Here you can switch between a read offset correction "+
         "and a combined read/write offset correction "+
         "without always typing in the new actual value."

101527 = "Usually a drive will not return the audio data from "+
         "the correct position, but from a number of samples before "+
         "or after that point. To compensate for this you can "+
         "specify a read offset correction for this drive. It should "+
         "be the same for all drives of the same model."

  7612 = "Read sample offset correction value"

  4301 = "Detect read sample offset correction..."
104301 = "EAC will try to autodetect the read offset using an audio "+
         "CD from the list in the documentation or on the official "+
         "homepage. There could be several pressings of a CD, so make "+
         "sure that you get a match from at least two different CDs."

  7608 = " Use combined read/write sample offset correction"

107609 = "This offset correction value is meant for correcting both "+
         "the read process and the write process. Of course a specific "+
         "value is always connected to this reader and the specific "+
         "writer. It would be different when using a different writer."

  7611 = "Combined read/write sample offset correction value"

  7603 = " Overread into Lead-In and Lead-Out "
107603 = "When using the read offset, there will be some data missing "+
         "either at the beginning or at the end of a CD, depending on "+
         "whether is offset is positive or negative. Some drives "+
         "allow reading before the actual CD starts or after the CD "+
         "has ended. So no samples will be missing in the "+
         "extraction using this compensation."

  1531 = "Speed selection"

101530 = "If the drive supports this, you will be able to select an "+
         "extraction speed. This could be handy for scratched CDs, "+
         "as extraction will be done in higher quality at a lower "+
         "speed. The 'Current' setting will not change the current "+
         "drive speed"

  4305 = " Allow speed reduction during extraction "
104305 = "EAC can reduce the speed automatically when a "+
         "read error occurs. It should speed up again when the "+
         "erroneous passage is gone, but not all drives will "+
         "speed up again."

  7604 = " CD-Text Read capable drive "
107604 = "If your drive supports the reading of CD-Text, you "+
         "should select this option. There are problems with some "+
         "drives when autodetecting this feature, so it has to "+
         "specified manually now."

  7613 = " Use AccurateRip with this drive "
107613 = "AccurateRip is a third tool which allows to check extracted "+
         "tracks against a checksum database in the internet. For this "+
         "the drive need to be calibrated using a special library of CDs, "+
         "afterwards AccurateRip can be used for comparing extraction results (as "+
         "long as the CD is in the internet database). The extraction "+
         "results will be stored as checksums and can be transferred to "+
         "the internet using the database menu in the main window. For more "+
         "information please have a look at http://www.accuraterip.com"

  7670 = 50
  7671 = 51



####################################################
# Drive Options - Gap Detection
####################################################

  9500 = "Gap Detection"

  9502 = "Gap/Index retrieval method :"
109501 = "To detect pre-track gaps and indices greater than 1, "+
         "EAC will use different techniques to determine "+
         "these using different drives. At least one of these "+
         "modes should work with your drive. You should select "+
         "the one that works best (fastest) with the drive."

  9504 = "Detection accuracy :"
109503 = "You can select if EAC should countercheck the extracted "+
         "index information. Doing so will just extract the index "+
         "several times in 'Accurate' and 'Secure' detection modes."

  9550 = "Detection method A"
  9551 = "Detection method B"
  9552 = "Detection method C"

  9560 = "Inaccurate"
  9561 = "Accurate"
  9562 = "Secure"



####################################################
# Drive Options - Writer
####################################################

 12700 = " Writer "

 12730 = "Write samples offset"
112701 = "As with the read offset, you can also specify an offset "+
         "for writing. This is also unique for a model from a "+
         "manufacturer."

 12709 = "Create Offset Test CD"
112709 = "This function will write an offset test CD. The "+
         "created CD depends on the settings in the write offset "+
         "control. If you use write offset 0, then you would "+
         "measure the combined read/write offset of this writer "+
         "and any reader you want using the 'Detect Read "+
         "Offset...' function. If you use the correct write offset "+
         "value, you will create a CD for determining the absolute "+
         "read offset of any reader. This function will actually "+
         "write data, so the CD will become filled with noise data!"

 12705 = "After burning finished"

 12702 = " reset drive by ejecting and loading CD-R"
112702 = "After the writing or testing is finished, EAC will "+
         "eject and load the CD. This is necessary on some CDs "+
         "to let them know that the content of the CD has "+
         "changed. Some drives even think that after a test "+
         "write the CD is not empty anymore, so you should "+
         "specify this option in that case."

 12703 = " only eject CD-R"
112703 = "If you want to write a pile of CDs it could be handy "+
         "to eject the CD automatically when EAC has finished "+
         "writing."

 12704 = " do not eject CD-R"
112704 = "When selecting this option, EAC will not eject the "+
         "CD after writing. This could cause problems with some "+
         "drives, as they do not acknowledge the actual content "+
         "of the CD."

 12706 = " Drive is able to write UPC/ISRC "
112706 = "If your writer supports the writing of UPCs and ISRCs, "+
         "you can specify this option to actually burn them."

 12707 = " Drive is able to write CD-Text "
112707 = "If your writer supports the writing of CD-Text information, "+
         "you can enable this option to have the artist and "+
         "title information written automatically to the CD. "+
         "CD-Text can be read afterwards with drives that are "+
         "CD-Text enabled."

 12708 = "Detect Write Features..."
112708 = "EAC can autodetect if your writer is able to "+
         "burn UPC/ISRC and CD-Text. For this test you need an "+
         "empty CD-R/CD-RW inserted. No data is actually "+
         "written, so the CD is not wasted."

 12780 = "Write offset value out of range !"



####################################################
# Compression Options - Waveform
####################################################

  6200 = "Waveform"

   910 = "Wave format"
100901 = "Windows supports different compression techniques "+
         "in its WAV format. The compression is done by codecs "+
         "that can be easily added to or removed from the system "+
         "if new compression formats arise. EAC itself also "+
         "'wraps' some compression DLLs so they look like codecs "+
         "(e.g. LAME DLL, BladeEnc DLL)."

   911 = "Sample format"
100902 = "Here you can select the sample rate, the "+
         "resolution and often the compression ratio of the "+
         "final audio file. The resolution of the CD is 16 bits "+
         "and the sample rate is 44100 Hz in order to preserve "+
         "audio CD quality."

   905 = " Add ID3 tag "
100905 = "The MP3 format has a special feature: it can "+
         "store the artist, composer, etc. within the actual "+
         "file, so that most MP3 players can read and display "+
         "this information. By selecting this option, a tag "+
         "will be added after extraction."

  6201 = " Do not write WAV header to file "
106201 = "For some files (e.g. MP3) Windows provides a codec "+
         "to read WAV files, but the format itself should "+
         "not be wrapped by a WAV header. So if you want to "+
         "create .mp3 files, you should activate this option "+
         "and specify that extension below."

  1301 = " High quality (slow)"
101301 = "Some Windows codecs support the quality setting, "+
         "using it to compress either with higher quality "+
         "or with higher speed."

  1302 = " Low quality (fast)"

  6203 = "File extension for headerless files"
106202 = "If you have selected the above option, you may "+
         "specify any filename extension. On MP3 compression "+
         "you would probably use the string .mp3 in this control."



####################################################
# Compression Options - External Compression
####################################################

  6000 = "External Compression"

  6001 = " Use external program for compression "
106001 = "EAC is able to use so-called command-line encoders. "+
         "These encoder packages usually come as .EXE "+
         "files that have to be started with the audio "+
         "filenames and a bunch of options in a DOS box. "+
         "EAC will call these encoders automatically "+
         "and pass them the appropriate parameters."

  6014 = "Parameter passing scheme :"
106015 = "There are many command-line encoders out there. "+
         "Nearly all of them use their own special formats "+
         "for passing parameters to the program. Here "+
         "you should select your encoder by name or a scheme "+
         "that is compatible with your encoder."

  6017 = "Use file extension : "
106016 = "The user-defined command-line encoder allows you to "+
         "specify any file extension. By this you are able "+
         "to use any current or future file format."

  6003 = "Program, including path, used for compression"
106002 = "Here you have to specify the location and the name "+
         "of the .EXE file of your encoder."

  6004 = "Browse..."

  6006 = "Additional command-line options :"
106007 = "If you know the command-line parameters and want "+
         "to add some parameters in order to use new features "+
         "or different quality settings, you may specify "+
         "them in this control. You can make use of the following placeholders:\n"+
         "%source% \t\t– source filename\n"+
         "%dest% \t\t\t– destination filename\n"+
         "%original% \t\t– original filename (without temporary\n"+
         "\t\t\t   renaming)\n"+
         "%ishigh%…%ishigh% \t– text \"…\" only when \"High quality\" selected\n"+
         "%islow%…%islow% \t– text \"…\" only when \"low quality\" selected\n"+
         "%haslyrics%…%haslyrics%\t– text \"…\" only when lyrics exist\n"+
         "%hascover%…%hascover%\t– text \"…\" only when storing cd cover is enabled\n"+
         "\t\t\t   and cover exists\n"+
         "%crcenabled%…%crcenabled – text \"…\" only when \"CRC checksum\"\n"+
         "\t\t\t   selected\n"+
         "%title% \t\t\t– track title\n"+
         "%genre% \t\t– MP3 music genre\n"+
         "%year% \t\t\t– year\n"+
         "%cddbid% \t\t– freedb ID\n"+
         "%artist% \t\t– track artist\n"+
         "%lyrics% \t\t– lyrics\n"+
         "%lyricsfile% \t\t– filename of lyrics text file (ANSI)\n"+
         "%bitrate% \t\t– selected bitrate (\"32\"..\"320\")\n"+
         "%comment% \t\t– comment (as selected in EAC)\n"+
         "%tracknr% \t\t– track number (same as %tracknr2%)\n"+
         "%tracknr1% \t\t– track number (at least 1 digit)\n"+
         "%tracknr2% \t\t– track number (at least 2 digits)\n"+
         "%tracknr3% \t\t– track number (at least 3 digits)\n"+
         "%totalcds% \t\t– total number of CDs in the given CD set\n"+
         "%cdnumber% \t\t– number of the CD\n"+
         "%composer% \t\t– track performer\n"+
         "%trackcrc% \t\t– CRC of extracted track\n"+
         "%coverfile% \t\t– filename of CD cover image\n"+
         "%numtracks% \t\t– number of tracks on album\n"+
         "%albumtitle% \t\t– CD title\n"+
         "%albumartist% \t\t– CD artist\n"+
         "%albumcomposer% \t– CD composer\n"+
         "%albuminterpret% \t– CD performer\n"+
         "%% \t\t\t– the \"%\" character\n"

  6008 = "Bit rate :"
106005 = "Here you can select a bit rate "+
         "for the encoded file. At least 128 kbits "+
         "are recommended."

  6013 = " Delete WAV after compression "
106013 = "EAC has to extract the audio track uncompressed to "+
         "the hard disk first in order to pass the filename to "+
         "the encoder. It is possible to keep that uncompressed "+
         "file along with the compressed one, or to delete the "+
         "uncompressed one."

  6009 = " Use CRC check "
106009 = "Some encoders support the storage of a checksum within "+
         "the audio file to allow the ability to check the "+
         "consistency of the file on playing. If this is enabled, "+
         "the encoder will write a CRC checksum, but beware, "+
         "as some encoders have a bug that calculates "+
         "the wrong checksum, and so many players "+
         "ignore the CRC field."

  6012 = " Add ID3 tag "
106012 = "The MP3 format has a special feature: it can "+
         "store the artist, composer, etc., within the actual "+
         "file, so that most MP3 players can read and display "+
         "this information. By selecting this option, a tag "+
         "will be added after extraction."

  6010 = " High quality"
106010 = "Some encoders support the quality setting, "+
         "using it to compress either with higher quality "+
         "or with higher speed."

  6011 = " Low quality"

  6018 = " Check for external programs return code"
106018 = "Most external applications can return an "+
         "error code to the shell. By using this option, EAC "+
         "will catch the return code. If the compression was "+
         "not successful (bad return code), EAC will show a "+
         "warning dialog, and also show the command line used."

  6019 = "Test encoder"
106019 = "In order to test the specified command line encoder, "+
         "EAC is able to compress a small piece of music with "+
         "the selected parameters and using some sample metadata "+
         "information. If errors on compression occured it will "+
         "help to track down bad encoder parameters."

  6050 = "Can not write temporary file!"

  6060 = "Unspecified encoder !"
  6061 = "Wrong path or program !"
  6062 = "You have selected a different command line encoder!\n\n"+
         "Shall I delete the additional command line parameters?     "
  6063 = "Invalid replacement tag found !"


####################################################
# Compression Options - Offset
####################################################

 10000 = 10099
 10099 = "Comment"

 10001 = " Use Offset Correction for encoding and decoding "
110001 = "Some compressors do not compress the audio data "+
         "as is, but they introduce an offset error so "+
         "that at the beginning is silence and at the end "+
         "often a number of samples (or more) are "+
         "missing. This could be bad for compressed live "+
         "recordings, as they can't be reproduced without "+
         "gaps anymore. By specifying this flag on "+
         "compression the file will be stuffed and on "+
         "decompression, by using the offset, the original "+
         "file could be reconstructed (in most cases)."

 10004 = "Sample Offset"
110002 = "This is the decompression offset; it should be "+
         "the same for the same encoder compressing with "+
         "the same quality. Usually you will autodetect "+
         "this offset using the function below."

 10003 = "Detect Offset..."
110003 = "EAC can autodetect the compression offset "+
         "from the compression formats Windows is "+
         "able to decompress. This should be finished within "+
         "several seconds."

 10005 = "This function will detect the offset between "+
         "the currently selected codec or external compressor "+
         "and the appropriate decompressor"

 10015 = " Use LAME command-line encoder/decoder for "+
         "decoding MP3 files"
110015 = "When selected, EAC will make use of the decoding "+
         "unit of the LAME executable instead of the "+
         "Fraunhofer MP3 codec. For that the LAME compressor "+
         "must reside in the EAC directory. If the "+
         "Fraunhofer codec is not available, the LAME decoder "+
         "will be used automatically (if installed)."

 10020 = "Construction of the ID3 tag comment field on "+
         "extraction"

 10009 = " Write \"Track <tracknumber>\" into ID3 tag "+
         "comment field"
110009 = "ID3 tags have the ability to store a "+
         "comment field within them. It is possible for "+
         "EAC to store different strings into it automatically "+
         "on creation. In this case EAC will store the "+
         "track number into the comment field."

 10010 = " Write CRC checksum into ID3 tag comment field"
110010 = "EAC will write into the comment field the track's "+
         "CRC checksum, which should be the same on a second "+
         "error-free extraction, but of course only for offset-"+
         "corrected reads or drives of the same model."

 10012 = " Write freedb ID into ID3 tag comment field"
110012 = "When using this option, EAC will put the freedb ID "+
         "(a hexadecimal number with 8 digits) into the ID3 tag "+
         "comment field. This can help to retrieve album information "+
         "for a single track from freedb at a later time."

 10011 = " Write following text into ID3 tag comment field"
110011 = "Using this option, EAC will write the same string into "+
         "the comment field of all ID3 tags it creates. This string "+
         "may be specified below and may have a maximum length "+
         "of 29-30 characters for ID3V1."

 10013 = " Write the comment text of the CD into ID3 tag comment field"
110013 = "Using the option, EAC will write the text entered in the "+
         "main windows CD comment for the ID3 tags of the given CD. "

110016 = "This string is written to all ID3 tag comment fields "+
         "and may have a maximum length of 30 (V1.0) or 29 (V1.1). "+
         "For ID3 V2 there is no length limitation."

 10040 = "Compression options have just changed !\n\n"+
         "You have to apply before detecting offset !   "
 10041 = "No compression selected !    "


####################################################
# Compression Options - ID3 Tag
####################################################

 11400 = "ID3 Tag"

 13703 = " Use ID3 V1.1 tags instead of ID3 V1.0 tags"
113703 = "In the newer ID3 format V1.1 it is possible to "+
         "store additionally the track number on the CD "+
         "in the ID3 tag. Most newer players are compatible "+
         "with the newer standard, but not all, possibly "+
         "resulting in a comment with a funny character at "+
         "the end."

 11413 = " Write ID3 V1 tags"
111413 = "The V1 tags are very limited (in size and fields), "+
         "but have the advantage to be universal, nearly "+
         "every other program can read them. You can use "+
         "either V1 tags, V2 tags or both!"

 11404 = " Write ID3 V2 tags, using a padding of"
111404 = "EAC can write the newer ID3 V2 tags. "+
         "The advantages are longer titles and track identifiers "+
         "and compatibility with streaming. The bad side is that "+
         "when using an external compressor, EAC needs to copy "+
         "the whole file after encoding."

111405 = "Because the ID3V2 tag is written at the start of a "+
         "file, it would be difficult to edit such a tag once "+
         "written. You could reserve some space for later "+
         "usage and additions. If no space would be reserved, "+
         "an edit operation will result in copying the "+
         "whole file."

 11406 = "kB"

 11411 = " Use ID3V2.4.0 tags instead of ID3V2.3.0 tags"
111411 = "When selected EAC will use the newer ID3V2 tag "+
         "standard version 2.4.0 instead of 2.3.0. There "+
         "may be incompatibilities with tagger or player "+
         "software using the new tagging standard."

 11403 = " Use track format xx/xx in ID3V2 tags (e.g. 01/16) "
111403 = "Usually track numbers will be stored in the ID3V2 tags the "+
         "same way as in ID3V1, with only the track number stored "+
         "within the tag. With ID3V2 it is possible to store "+
         "the track number as well as the total number of tracks. "+
         "Most programs will display the information as "+
         "track number/total tracks."

 11401 = " Use unsyncronization scheme on ID3V2 tags"
111401 = "The MP3 format has a special sync pattern (FFFx), which might "+
         "show up in standard tagging fields. In order to improve readability "+
         "by a MP3 player, it is possible to make sure that no syncronization "+
         "pattern shows up in the tagging data (as it can't confuse the "+
         "tagging data with real MP3 data). But quite much players do not "+
         "obey the standard and thus can't extract the tags correctly anymore "+
         "as e.g. the Windows Media Player. Thus it is not recommended to use "+
         "this scheme (even though it would be the correct choice)!"

 11402 = " Write ID3V2 tags using UTF16"
111402 = "Standard ID3V2 tags only allow ISO-8859-1 characters. If you "+
         "want other languages with specific character sets, it will be "+
         "necessary to use this flag. Without this flag, EAC will try to "+
         "encode the tag fields using multibyte encoding, but this is not "+
         "recommended, as some players will not show the correct text "+
         "(as it doesn't know the correct code page). The downside is that "+
         "some players doesn't accept unicode ID3V2 tags at all - so you "+
         "need to try out what fits you best."

 11410 = " Add cover image to ID3V2 tag"
111410 = "If the current CD information has a cover image included, "+
         "it will be added to the ID3V2 tag. This is not possible for all "+
         "compression schemes, for command line encoder it need to be "+
         "specified using the %coverfile% option (probably in conjuction with %hascover%...%hascover% "+
         "enclosures, as this option triggers %hascover%). One thing using LAME "+
         "and let it do the tagging is that it will only work with newer LAME "+
         "versions and only accept images up to a limit of 128kB in size. "+
         "Further, large image sizes will increase the created file sizes "+
         "dramatically, e.g. if you have an image of 1 MB in size and add it to all 20 "+
         "tracks of a CD, you will end up with 20 MB more harddisk space used!"

 11412 = " Write cover image into extraction folder"
111412 = "The cover image of a CD (if existent) will be written in the "+
         "extraction folder under the name \"folder.jpg\" (or in whichever "+
         "file format it is stored)."

  4481 = "- Track title   (mandatory)"
  4482 = "- CD or track artist"
  4483 = "- Release year"
  4484 = "- CD title"
  4485 = "- Comment"
  4486 = "- ID3 music type"
  4487 = "- Track number   (using ID3 V1.1 tags)"

  4490 = "For example : "
104417 = "This is a sample of how a filename construction "+
         "might look. You can copy these "+
         "settings to the control above."
         
 11415 = "Namening scheme:"
111414 = "Like naming files you can here specify the scheme  "+
         "of the cover filename. For that similar placeholders "+
         "or even a fixed name (e.g. \"folder\") can be specified. "+
         "The matching file extension (\".jpg\", \".gif\" or different) will "+
         "be added automatically depending on the image type.\n"+
         "The possible placeholders for this field are:\n"+
         "%numtracks% \t\t- number of tracks on album\n"+
         "%albumtitle% \t\t- CD title\n"+
         "%albumartist% \t\t- CD artist\n"+
         "%albuminterpret% \t- CD interpret\n"+
         "%albumcomposer% \t- CD composer\n"+
         "%year% \t\t\t- year\n"+
         "%genre% \t\t- genre\n"+
         "%cddbtype% \t\t- freedb genre\n"+
         "%cddbid% \t\t- cddb ID\n"+
         "%comment% \t\t- comment\n"+
         "%totalcds% \t\t- total number of CDs in the given CD set\n"+
         "%cdnumber% \t\t- number of CD\n"+
         "%% \t\t\t- The \"%\" character"
        
 11440 = "Invalid Filename !"



####################################################
# Compression Options - Gogo DLL
####################################################

 14100 = "Gogo DLL"

 14111 = "Additional parameters for the Gogo MP3 Encoder DLL"

 14102 = "Output mode"
114101 = "This parameter will let you change in which "+
         "stereo or mono output mode MP3s are encoded "+
         "using the Gogo DLL."

 14103 = "Emphasis setting"
114106 = "If you want to add emphasis to your encoded MP3s, "+
         "you can select one of two standard emphasis methods."

 14107 = "Number of CPUs"
114108 = "On multiprocessor systems, Gogo can "+
         "start its encoding divided into several threads. "+
         "This will allow faster encoding as all "+
         "processors will work simultaneously. On single-"+
         "processor systems, this flag is without any use."

 14109 = "VBR quality"
114110 = "In VBR mode, you can specify a quality "+
         "setting that will affect encoding bitrate "+
         "allocation. If you use quality 0, the bitrate "+
         "usually will approach the max bitrate, whereas if "+
         "you use quality 9, the bitrate usually will be around "+
         "the base bitrate. Using Gogo, VBR seems only "+
         "to work correctly if you use the psycho-accoustics."

 14104 = " Use psycho-acoustics "
114104 = "An acoustic model helps an audio encoder to "+
         "decide which parts of the audio signal could "+
         "be removed without being missed. This is a "+
         "new experimental model included in Gogo."

 14105 = " Disable low pass filter "
114105 = "It is possible to disable the internal encoder's "+
         "signal low-pass filter in order to compress "+
         "signals up to 22.5 kHz. Of course the drawback "+
         "is that encoding will need more space or at the "+
         "same length the quality will suffer."

 14180 = "Mid/Side Stereo"

 14190 = "None"



####################################################
# Compression Options - LAME DLL
####################################################

 14200 = "LAME DLL"

 14203 = "Additional parameters for the LAME MP3 Encoder DLL"

 14204 = "Output mode"
114209 = "This parameter will let you change in which "+
         "stereo or mono output mode MP3s are encoded "+
         "using the LAME DLL."

 14201 = "Quality"
114202 = "There are different encoding qualities possible "+
         "when using the DLL, each of which also affect "+
         "encoding speed."

 14205 = "Maximum VBR bitrate"
114210 = "LAME allows a maximum bitrate to be specified when "+
         "using VBR (Variable Bit Rate); the base bitrate "+
         "is what you have chosen in the main encoder tab."

 14216 = " Use VBR quality"
114216 = "In VBR mode, you can specify a quality "+
         "setting that will affect encoding bitrate "+
         "allocation. If you use quality 0, the bitrate "+
         "usually will approach the the max bitrate, whereas if "+
         "you use quality 9, the bitrate usually will be around "+
         "the base bitrate."

114211 = "This value specifies the VBR quality for the "+
         "MP3 file. This VBR mode creates MP3 "+
         "files of nearly uniform quality throughout."

 14215 = " Use VBR average bitrate"
114215 = "The average bitrate mode will not always use the "+
         "same quality; it will average the bitrate over the "+
         "whole file to the specified value."

114214 = "This value specifies the average bitrate for the "+
         "MP3 file. This has the advantage of determining "+
         "before compression approximately what size the "+
         "resulting file will have."

 14207 = " Insert CRC checksum "
114207 = "This flag will add to all encodings a checksum value, "+
         "which can be used by some players to verify audio "+
         "correctness. As there were wrong CRC calculations in "+
         "early MP3 encoders, most MP3 players will ignore "+
         "any CRC checksums."

 14208 = " Write Xing VBR header on VBR encoding "
114208 = "Using this option, the LAME encoder will write a "+
         "VBR header in front of the file, allowing some players "+
         "to detect the file as VBR correctly."

 14270 = "0 (High Quality)"
 14271 = "5 (Normal)"
 14272 = "9 (High Compression)"

 14280 = "Stereo"
 14281 = "Joint Stereo"
 14282 = "Dual Channel"
 14283 = "Force Mono"

 14290 = "Normal Quality"
 14291 = "Low Quality"
 14292 = "High Quality"
 14293 = "Voice Quality"



####################################################
# Internet Options - freedb
####################################################

  6180 = " freedb "

  6181 = "Your e-mail address :"
104601 = "For retrieving or sending data from/to the freedb "+
         "CD database, you need to enter your email address. "+
         "This email address will be used on submissions "+
         "for error reports."

  6182 = "Freedb server :"
104602 = "There are several Internet servers that could "+
         "be used for freedb communications. If one server "+
         "does not work, try to use a different one."

  4605 = "Get active freedb server list"
104605 = "If the server in the list does not work, it is "+
         "possible to download a more recent list."

  4610 = " Use Proxy Server for HTTP access "
104610 = "When your server is behind a firewall to protect "+
         "your company against attacks from the Internet, "+
         "use this proxy protocol."

  4609 = "Proxy Server :"
104606 = "Here enter the name of your proxy server."

  4608 = "Port :"
104607 = "This is the port number of your proxy."

  4613 = " Use authentication for Proxy Server "
104613 = "If your firewall/proxy is protected against illegal "+
         "access, specify a username and password "+
         "for proxy use."

  4614 = "Proxy username :"
104611 = "This is the username that is used to log into "+
         "the proxy server."

  4615 = "Proxy password :"
104612 = "You may enter the password for the proxy account "+
         "here, or you may leave this field blank, in which "+
         "case EAC will ask you every time you access freedb "+
         "for the password. In that case, the password is not "+
         "stored in the options at all."

  6183 = " On a connection error, retry query using a different "+
         "server from the server list"
106183 = "Sometimes a freedb query cannot return a result because "+
         "the server is overloaded or down. In order to provide easy "+
         "recovery from freedb problems and to make it possible to "+
         "retrieve the CD data quickly even when there are problems "+
         "with the selected server, EAC can try other servers as well."

  6190 = "Invalid E-mail address !\n\nDo you want to edit your email address now? "
  6191 = "Invalid server address !"
  6192 = "Please enter proxy information !"
  6193 = "Please enter proxy username !"
  6194 = "Invalid proxy information !"



####################################################
# Internet Options - Local freedb
####################################################

  9800 = "Local freedb"

  9801 = " Use local freedb database "
109801 = "You may store the freedb data locally on your "+
         "hard disk. This will be done in the native freedb format, "+
         "rather than in EAC's own format."

  9804 = "Local freedb path :"
109805 = "Here you should specify the directory that "+
         "will be used as a base for the freedb native database."

  9806 = "Browse..."

  9803 = " Windows freedb file format"
109803 = "If this option is selected, EAC will use a Windows-"+
         "optimized version of the database, so a new file is not "+
         "created for every entry. This will result in less "+
         "waste of hard disk space."

  9802 = " Unix freedb file format"
109802 = "If this option is selected, the native Unix freedb format "+
         "is used, resulting in one file per CD entry. Large "+
         "databases on older filesystems will waste hard disk space "+
         "using this option."

  9807 = "The Windows freedb file format will be better for FAT16 "+
         "and other older filesystems, whereas the "+
         "Unix file format will create a file for each freedb entry."

  9891 = "Select Path For Local freedb"



####################################################
# Internet Options - Export
####################################################

 14600 = "Export"

 14605 = "Construction of database export lines"
114601 = "This control contains the placeholders "+
         "that define how each line of data is formatted for exporting "+
         "to a database file. Some databases import text "+
         "files with different kinds of separators (delimiters) between "+
         "each element. Here you may manually specify the order of "+
         "data fields and separator characters."

 14603 = "- Track length"
 14606 = "- Tabulator character"

 14690 = "Invalid Export Line !"


####################################################
# Internet Options - Metadata Provider
####################################################

 16500 = "Metadata Provider"

 18901 = "Selected metadata provider"
118905 = "EAC is able to access various providers of "+
         "metadata. Besides the integrated freedb provider, "+
         "there exist several additional (also commercial) "+
         "providers. Choosing from within this list will "+
         "select the used metadata provider. It is also possible "+
         "to choose the provider on the main screen through a "+
         "drop down image box."

 18902 = "Show options of the selected metadata provider" 
118902 = "This will open the option window of the selected "+
         "metadata provider. There it is possible to change "+
         "various options (depending on the used provider), e.g. "+
         "login information (for commercial providers) or used internet servers."

 18910 = "Build-in freedb engine"

 18900 = 16500


####################################################
# Wave Editor Options - Editor
####################################################

  8500 = "Editor"

  8501 = " Follow display while playing audio "
108501 = "When selected the waveform display will scroll "+
         "automatically when playing. This will consume "+
         "computation time, so if your sound output isn't "+
         "continuous, then you should deselect this option."

  8508 = " Create waveform profile on hard disk "
108508 = "EAC can create a profile of a file on your "+
         "hard disk. Using a profile will make reopening the "+
         "audio file in the editor much faster. "+
         "Of course this will consume some hard disk space."

  8509 = " Double channels on mono playback "
108509 = "If one channel in the editor is played, there are two "+
         "possibilities. Normally, only the left or right channel "+
         "is played, and the other channel is silent. Alternatively, the "+
         "appropriate channel can also be played on the other channel, "+
         "resulting in a mono playback using both channels."

  8515 = " Use main memory for storing temporary data"
108515 = "It is possible for EAC to not write temporary data to "+
         "the hard disk, but to use main memory instead. This has the "+
         "advantage of decreased processing time for most "+
         "functions. The drawback is that only files whose processed "+
         "range will fit completely into memory can be edited. "+
         "So, e.g. normalizing a disc image will not work on most "+
         "computers."

  8516 = " Use temporary file on a hard disk"
108516 = "EAC will use the specified directory on the hard disk for "+
         "storing temporary data for processing. Make sure that enough "+
         "free space is on the drive in order to store the whole file "+
         "to be processed."

  8510 = "Temp path : "
108511 = "Working on an audio file requires a temporary file on which "+
         "all operations are performed. Only when saving the changes "+
         "in the editor will the original file be altered. This "+
         "specifies the location of the work file."

  8512 = "Browse..."

  8513 = "Space left on Temp drive :"

  8517 = " Use Undo"
108517 = "The wave editor can store changes to a file to allow you to "+
         "restore the previous state of the waveform. To enable "+
         "this feature, this flag must be set and a valid path "+
         "must be given below."

  8503 = "Undo path :"
108504 = "To undo sound effect operations, it is necessary to "+
         "store undo information on the hard disk. Here "+
         "specify a location where these undo files are stored."

  8505 = "Browse..."

  8506 = "Space left on Undo drive :"

  8590 = "Select Path For Undo File"
  8591 = "Select Path For Temp File"



####################################################
# Wave Editor Options - Compare
####################################################

  9300 = "Compare"

  9301 = " Determine differences more exactly "
109301 = "Using WAV compare, EAC can search more deeply "+
         "for equal portions of the two files. This could result "+
         "in much longer comparison times."

  9302 = "This option will make the comparison of two WAV files "+
         "more exact. On the other hand, it slows down the comparison, "+
         "making the calculation extremely slow for files with many "+
         "differences (e.g. two completely different files)."



####################################################
# Wave Editor Options - Record
####################################################

 10200 = "Record"

 10201 = " Do not use dB level meter on recording "
110201 = "On time-critical recordings (e.g. if you use a slow computer), "+
         "you can disable the level meter display. This will lower "+
         "the CPU usage significantly."

 10202 = " Try to free memory before loop recording "
110202 = "Loop recording will allocate a buffer in memory for the loop "+
         "data. Windows sometimes does not free allocated space "+
         "immediately, but only when it is needed. EAC can force "+
         "Windows to free as much memory as possible in order to have "+
         "maximum memory available for recording."




####################################################
# EAC Configuration Wizard - Welcome
####################################################

 15000 = "Welcome"

 15001 = "Welcome to the EAC setup wizard !"
 15003 = "This wizard will guide you through the main setup issues. All "+
         "necessary options needed for installing your drives and "+
         "compressors can be set up according to your "+
         "preferences."

 15004 = "If you want to manually configure the options, you can "+
         "abort this wizard at any time, and no changes will take effect."

 15005 = "The first step will be to configure your CD reader(s) to "+
         "your preferences, depending on if you want secure extractions "+
         "or faster, but unverified, reads. Second will be the setup "+
         "of external compressors like LAME."

 15006 = "All further options will be set to default values that "+
         "will work for most users and most drives. If there are "+
         "problems, you can modify the appropriate options "+
         "manually afterwards."



####################################################
# EAC Configuration Wizard - CD-ROM Selection
####################################################

 15100 = "CD-ROM Selection"

 15102 = "EAC will now start to configure your CD-ROM drive(s). First "+
         "of all, please select the drive(s) that you want to use for "+
         "extraction. If you don't know at the moment which drive you "+
         "will use for reading, let EAC best configure all of your drives."

 15112 = "In the next step, EAC will configure each of your "+
         "drives at a time. EAC will ask in some cases for inserting "+
         "an audio CD into the specific drive."
 15103 = "EAC detected the following CD drive(s) in your system. Please "+
         "select which drives EAC should autoconfigure."



####################################################
# EAC Configuration Wizard - Extraction Preferences
####################################################

 15200 = "Extraction Preferences"

 15210 = "EAC will now configure the CD drive"
 15211 = "Depending on what you want, EAC can provide several "+
         "modes. You can choose between speed and accuracy. Only "+
         "the accurate secure mode will provide you with error "+
         "detection and correction with verified results, preventing "+
         "pops and clicks."
 15212 = "For this drive, what you do prefer ?"
 15205 = " I prefer to have accurate results"
 15206 = " Only speed is important"



####################################################
# EAC Configuration Wizard - Feature Database
####################################################

 15300 = "Feature Database"

 15302 = "EAC has found this drive in its drive feature database "+
         "and is able to use the following configuration data "+
         "for this drive."
 15303 = "Accurate stream : "
 15304 = "Audio cache :"
 15305 = "C2 error information :"
 15311 = "Though the test reported C2 capabilities, there was "+
         "no validated information that the drive really supports C2. "+
         "Thus most probably it doesn't (or wrongly) support it. "+
         "EAC will disable C2 for now."

 15309 = " Use these values to configure this drive"
 15310 = " I don't trust these values, detect the features for my drive"



####################################################
# EAC Configuration Wizard - Feature Detection
####################################################

 15400 = "Feature Detection"

 15402 = "EAC will now autodetect the drive features for your drive. "+
         "For this test you need a clean and unscratched music CD in "+
         "the CD drive."

 15404 = "This test should take around 1-4 minutes to work. If all "+
         "results are displayed immediately, most probably the test "+
         "didn't work correctly. In such a case please use the "+
         "<Back> button on the bottom of the configuration wizard "+
         "and try again."



####################################################
# EAC Configuration Wizard - Feature Results
####################################################

 15500 = "Feature Results"

 15502 = "EAC has found these drive features for your drive. If you "+
         "are an experienced user and think that these values are "+
         "probably not correct, try different settings in the drive "+
         "options of this drive."

 15511 = "The detection should have taken around 1-4 minutes. "+
         "If the results were shown immediately, most probably "+
         "something went wrong. In that case, please use <Back> "+
         "and try again."

 15504 = "Accurate stream :"
 15505 = "Audio cache :"
 15506 = "C2 error information :"

 15503 = "The test for the C2 error information feature does not "+
         "tell whether C2 is correctly implemented and usable. For "+
         "this information further tests are needed (drive options); "+
         "for now it will be disabled."



####################################################
# EAC Configuration Wizard - Drive Rating
####################################################

 15600 = "Drive Rating"

 15601 = "Congratulations!"
 15602 = "EAC has now configured all your drives for your "+
         "specified needs."

 15603 = "From the selected drives EAC has found that the drives "+
         "in the following order would bring the best extraction "+
         "results and will select the first as default. Of "+
         "course you should also try the other drives if any of "+
         "them works better for you."
 15605 = "Best drive :"
 15606 = "2nd best :"
 15607 = "3rd best :"
 15608 = "4th best :"
 15609 = "5th best :"
 15610 = "6th best :"
 15611 = "7th best :"
 15612 = "8th best :"
 15613 = "(*) : Downrated because of burst read mode"



####################################################
# EAC Configuration Wizard - Encoder Introduction
####################################################

 16000 = "Encoder Introduction"

 16001 = "Depending on your needs you can either "+
         "extract the CD tracks completely uncompressed "+
         "into so-called WAV files, which need around "+
         "10 MB/minute storage space. Or you can compress the tracks "+
         "e.g. to the well known MP3 files for your "+
         "portable music player (around 1.5 MB/minute). "+
         "For that, EAC is able to utilize a variety of externally "+
         "provided encoders, e.g. MP3, WMA, Ogg Vorbis are "+
         "so called lossy formats, they can bring down the "+
         "file size to very small amounts, but there is some "+
         "loss in sound quality included in this process. Other "+
         "compression formats like e.g. FLAC, WMA Lossless, Monkeys Audio or "+
         "Shorten have no loss in audio quality, but usually use up "+
         "to around 6 MB/minute storage space. They are often used "+
         "to store CDs on hard disk drives "+
         "for archival purposes, as they allow bit-correct reproduction "+
         "of a CD, even though they reduce the size of the file "+
         "to around half the size of an uncompressed WAV file. "+
         "In the next step you are able to select between the "+
         "four most often used compression schemes : MP3 and WMA (for lossy "+
         "compression) and FLAC and WMA Lossless (for lossless compression). "+
         "Of course you are additonally able to extract "+
         "to uncompressed WAV, this does not depend on the selected "+
         "compression scheme. Also you can choose a different encoder "+
         "manually in the compression options."


####################################################
# EAC Configuration Wizard - Encoder Selection
####################################################

 16050 = "Encoder Selection"
 
 16051 = "As described on the previous page, you are now able to select "+
         "between the two most often used compression schemes. For users "+
         "who just would like to transfer CDs to portable audio players, "+
         "the choice of MP3 is most often the correct one. If you want to "+
         "archive your CDs, in order to be able to write an exact copy "+
         "back to a CD-R whenever it is needed, you probably should "+
         "go with FLAC."

 16053 = "Besides the possibility of uncompressed extraction, I would like to be "+
         "able to compress my files"
 16052 = "with marginal quality losses (e.g. for portable players)"

 16054 = " MP3 files (around 1.5 MB/minute)"
 16055 = " WMA (around 1.5 MB/minute)"
 
 16059 = "or for archiving purposes"
 
 16056 = " FLAC (around 6 MB/minute)"
 16057 = " WMA Lossless (around 6 MB/minute)"
 
 16058 = " nothing right now, I will configure it later manually"

 16060 = "FLAC could not be found in EACs directory, even\n\n"+
         "though it should have been installed during EACs installation!   "

 16061 = "The Microsoft Expression Encoder 4 could not be found on "+
         "your computer! "+
         "Please make sure that you have at least Expression Encoder 4 "+
         "installed! \n\n"+
         "You can download the Expression Encoder 4 as a free download "+
         "from Microsoft. Go to     \n\n"+
         "http:\\\\www.microsoft.com  and search for \n"+
         "\"Download Expression Encoder 4 Free Edition\".    \n\n"+
         "Afterwards download the package and install it. If "+
         ".NET 4 isn't installed, you need to install that package also.    "
         


####################################################
# EAC Configuration Wizard - Flac Configuration
####################################################

 16100 = "FLAC Configuration"
 16101 = "The FLAC encoder has been installed and configured "+
         "with settings which are alright for most users! "+
         "If you need to change some encoder settings, please "+
         "go to the compression settings later on."



####################################################
# EAC Configuration Wizard - WMA Configuration
####################################################

 16200 = "WMA Configuration"
 16201 = "The WMA encoder has been installed and configured "+
         "with settings which are alright for most users! "+
         "If you need to change some encoder settings, please "+
         "go to the compression settings later on."



####################################################
# EAC Configuration Wizard - WMA Lossless Configuration
####################################################

 16300 = "WMA Lossless Configuration"
 16301 = "The WMA Lossless encoder has been installed and configured!"



####################################################
# EAC Configuration Wizard - LAME Download
####################################################

 15700 = "LAME Download"

 15750 = "In order to compress audio files to the MP3 format, "+
         "an MP3 encoder program is needed. Due to licensing "+
         "and patent issues, it is not possible to include such "+
         "a MP3 encoder in the EAC installer package. One of "+
         "such a MP3 encoder program is called LAME, which is "+
         "freely available on the internet. Please note that "+
         "the algorithms behind MP3 might be patented in your "+
         "country, which would make it necessary to obtain a license "+
         "for such a MP3 encoder (see http://mp3licensing.com)."
 
 15751 = "Note : The LAME executable can be downloaded from "+
         "various sites, e.g. try the webpage mentioned below. "+
         "For this configuration wizard it is assumed that "+
         "you use at least the stable version of 3.90 of LAME, "+
         "or any newer version. Download the file now and install "+
         "it on your computer, if you haven't already done this. If the "+
         "LAME download is just a ZIP archive, open it and copy "+
         "all files into same directory where you did install EAC."

 15752 = "Please note that I distance myself from the content "+
         "of the pages I list here. The content may be "+
         "illegal or contain patented algorithms depending "+
         "on the country you live in."


####################################################
# EAC Configuration Wizard - LAME Configuration
####################################################

 15800 = "LAME Configuration"

 15701 = "Hopefully you have already installed the "+
         "LAME.EXE file into a directory of your choice. Now "+
         "you need to specify the directory and EXE file of "+
         "LAME for EAC. You can examine your hard disk by "+
         "using the <Browse> button."
 15802 = "If you have just installed a new version of LAME.EXE, "+
         "you can go <BACK> and again search automatically "+
         "for it."

 15703 = "Encoder :"
 15704 = "Browse..."

 15801 = "A standard set of options will be selected. You can "+
         "choose between a low and high quality profile in EACs compression "+
         "options. The low profile is VBR around 128 kBit/s (ca. 1 MB/min) and the "+
         "high setting is VBR around 192 kBit/s (ca. 1.5 MB/min). By default "+
         "the high profile is selected. You can change these settings manually "+
         "in the compression options afterwards."

 15707 = " Let EAC create ID3 tags (ID3V1.1 and ID3V2)"



####################################################
# EAC Configuration Wizard - freedb Configuration
####################################################

 15900 = "freedb Configuration"

 15901 = "Now you can set up your freedb access. freedb is "+
         "an Internet service that provides album information "+
         "like CD and track names. By using freedb, EAC is "+
         "able to automatically retrieve these information "+
         "of an inserted CD."

 15902 = "Of course it is also important that if a CD is not "+
         "found in the database, that you submit these "+
         "data to freedb after you entered them in EAC."

 15905 = "Your email address :"
 15906 = "(if left blank, this feature is not activated for "+
         "now, but you can change this anytime in the freedb "+
         "options)"
 15904 = "If you are behind a proxy or firewall, you need to "+
         "set some more options in the freedb options manually "+
         "afterwards."



 16150 = "Filename Configuration"

 16151 = "EAC is able to configure how a file should be named "+
         "down to the last detail. The following list shows only "+
         "the most used configurations of naming schemes that are commonly "+
         "used with audio files. You can either let configure EAC the "+
         "selected naming scheme or leave the current naming scheme "+
         "intact, for later manual configuration in the EAC options."

 16152 = "Image you have the album with the title \"Number Ones\" from "+
         "the famous band \"ABBA\" inserted in your CD drive. Track 3 of "+
         "this CD is the track \"Dancing Queen\". Please select a naming "+
         "scheme from the following list (which shows this track 3 as example), "+
         "or just leave the current configuration unchanged. An \\ character "+
         "in the filename denotes that a subdirectory will be created with "+
         "the text before \\ as directory name."

 16159 = "Leave naming scheme unchanged"


####################################################
# EAC Configuration Wizard - Done
####################################################

 15950 = "Done"

 15952 = "Done!"
 15953 = "The configuration of the basic EAC functionality is "+
         "now finished. There are many more tweaking options "+
         "you can discover by browsing the options. Most "+
         "options have an informational tooltip with an explanation "+
         "of that option."
 15804 = "To make EAC easy to use for beginners of DAE, "+
         "it is possible to hide all advanced features. "+
         "If you are not familiar with DAE, gaps, indices, "+
         "offsets and possible problems of use, you should "+
         "use the beginner mode."

 15805 = " I am a beginner, make all options as easy as possible"
 15806 = " I am an expert, let me use the full potential of EAC"
 15951 = "(You can change this setting anytime in the "+
         "EAC options)"
 15803 = "I hope the first steps of copying audio will now "+
         "be much easier and safer. If you experience any "+
         "other problems, subscribe to the EAC mailing list "+
         "where all kinds of problems concerning EAC are discussed."



####################################################
# EAC Dialogs - About
####################################################

  1000 = "About Exact Audio Copy"

  1004 = "Legal Notice"

  1005 = "This program is Cardware."
  1006 = "Please read the documentation for further information "+
         "on Cardware."
  1007 = "This program may be copied for private purposes. "+
         "It may not be included in commercial collections "+
         "like shareware CD-ROMs, etc. without written permission."
  1008 = "For more legal information please read the chapter "+
         "about legal information in the documentation."
  1009 = "Additional graphics by Matija Krnic"
  1010 = "Music CD-related data is provided among others through the "+
         "Internet from freedb, the free Internet music database."

  1002 = "EAC includes in some versions the CDRDAO CD write "+
         "engine. The included executables are compiled "+
         "from the unmodified original version. "+
         "For source code, please have a look at "+
         "http://cdrdao.sourceforge.net/ "
  1011 = "CDRDAO needs an additional library, the Cygwin emulation "+
         "layer. An unmodified version of the component is used; "+
         "the source code can be downloaded at http://www.cygwin.com/"
  1012 = "The FLAC (Free Lossless Audio Codec) is included in the "+
         "EAC package. An unmodified version of the command line "+
         "encoder is used; the source code can be downloaded at "+
         "http://flac.sourceforge.net/"

  1001 = 10



####################################################
# EAC Dialogs - Auto Extract
####################################################

 13600 = "Warning"

 13601 = "EAC will automatically start extraction in"
 13603 = "seconds !"
 13602 = "Press Cancel to prevent the automatic extraction "+
         "and to disable Auto Extraction for this session."

 12801 = 11



####################################################
# EAC Dialogs - Test External Compressor
####################################################

 18800 = "External Compressor Test"
 18802 = "Used commandline :"
118801 = "This is the command line passed to the external compressor "+
         "by EAC. You can verify that all parameters are passed "+
         "correctly to the external compressor. If a command line doesn't "+
         "work out, it is often missing quotes around some arguments, "+
         "make sure that you output all tags with surrounding quotes."
 18810 = "Compressor output :"
118809 = "The text field shows what the external command line encoder "+
         "passes back as output. If an error occured, usually a more detailed "+
         "error message is shown in this text box."
 18803 = "Return code :"
 18805 = "Average bitrate :"
 18807 = " Take over the average bitrate result to the compression options "
118807 = "If this flag is set, EAC will use the determined bitrate value "+
         "and put it into the estimated bitrate within the external "+
         "compression options. As the option field only contain some discrete "+
         "values, the next best value will be choosen."
 18808 = 10
 18815 = "No error occured"


####################################################
# EAC Dialogs - Browse Database
####################################################

  5300 = "Browse Database"

  5310 = "List of all CDs in database"

  5302 = "Extended"
  5307 = "Clipboard"
  5305 = "Apply CD"
  5304 = "Delete CD"
  5320 = "Different number of tracks"
  5321 = "All data of the current CD will be deleted !\n\n"+
         "Do you really want to continue ?"
  5322 = "You must select a CD to apply"
  5323 = "You must select a CD to delete"

  5301 = 10



####################################################
# EAC Dialogs - CD-R Capacity
####################################################

 12500 = "CD-R Capacity"

 12520 = "Nominal capacity :"
 12521 = "Overburn capacity :"
 12522 = "Manufacturer :"
 12523 = "Media identifier :"
 12524 = "- min"
 12525 = "- sectors"
 12526 = "- MB"
 12528 = " min"
 12527 = " sectors"
 12529 = " MB"

 12505 = 10
 12510 = 11



####################################################
# EAC Dialogs - CD Copy Options
####################################################

 13800 = "CD Write Options"

 13803 = "Write speed :"
 13804 = "Write mode :"
 13805 = "Close mode :"
 13802 = " Delete image file after write "
 13801 = " Ask before actually writing "
 12609 = "Make It So"
 13820 = "Close CD"
 13821 = "Leave CD open"
 13822 = "No Test Write"
 13823 = "Only Test Write"
 13824 = "No empty CD-R/CD-RW found in selected drive !  Try again ?"

 12610 = 11



####################################################
# EAC Dialogs - CD Write Options
####################################################

 12100 = "CD Information"

 12120 = "Used space :"
 12121 = "Free space :"
 12122 = "Capacity :"
 12123 = "Content type :"
 12124 = "CD status :"
 12125 = "CD manufacturer :"
 12126 = "Write strategy :"
 12130 = "Empty"
 12131 = "Open Session"
 12132 = "Finished"
 12133 = "CD-DA or CD-ROM"
 12134 = "No CD in drive"

 12101 = 10



####################################################
# EAC Dialogs - CD (Write) Information
####################################################

 13400 = "CD Information"

 13405 = "CD title"
  3703 = " Various artists "
  3709 = "CD artist"
 13401 = "CD UPC"
 13420 = "UPC must contain 13 characters !"

  3707 = 10
  3708 = 11



####################################################
# EAC Dialogs - CD Layout Editor
####################################################

 12200 = "CD Layout Editor"

 12209 = "Use CD-R drive"
 12219 = "Options..."
 12203 = "Graphical CD Layout"
 12211 = "Track : "
 12212 = "Index : "
 12213 = "Time : "
 12201 = "CD Layout"
 12202 = "Used Files"
 12220 = "Title"
 12221 = "Filenr"
 12222 = "Track"
 12223 = "Index"
 12224 = "Absolute Position"
 12225 = "Relative Position"
 12226 = "Length"
 12228 = "Filename"
 12229 = "None"
 12230 = "File open error"
 12231 = "The following files were not accepted as audio source :"
 12232 = "Track "
 12233 = "Are you sure that you want to leave without saving the "+
         "current CUE sheet ?  "
 12234 = "Append Files As Index 1"
 12235 = "The file "
 12236 = "\n\nalready exists in your current layout! Do you really "+
         "want to add it ?    "
 12237 = "Append Files As New Index"
 12238 = "Append Files As Index 0"
 12239 = "No indices selected !"
 12240 = "Creating a new layout will delete the current layout !\n\n"+
         "Do you really want to continue ?    "
 12241 = "Save CUE Sheet"
 12242 = "Erasing this CD-RW will delete all data on it !\n\n"+
         "Do you really want to continue ?    "
 12243 = "No CD-RW inserted in the selected drive !"
 12244 = "It is only possible to move one stream !"
 12245 = "Nothing selected !"
 12246 = "There is no writable CD in drive !  "
 12247 = "Extraction has finished. Do you now want to write the CD ?"
 12248 = "Loading a CUE sheet will delete the current layout !\n\n"+
         "Do you really want to continue ?    "
 12249 = "Load CUE Sheet"
 12250 = "Too much CD-Text information !\n\n"+
         "Only around 3 kBytes of CD-Text information are possible.   \n\n"+
         "Please reduce the CD-Text information for this layout.   "

 12227 = 12221



####################################################
# EAC Dialogs - Change CUE Position
####################################################

 14500 = "Change CUE Position"

 14510 = "Track :"
 14511 = "Index :"
 14512 = "Time position :"
 14520 = "Time marker overlaps with previous or next timemarker !"
 14521 = "Time format is not correct !"

 14501 = 10
 14502 = 11



####################################################
# EAC Dialogs - Clear Current CD Information
####################################################

  5100 = "Clear"

  5105 = "Clear current CD information"
  5104 = "All data of the current CD will be overwritten !"
  5106 = "Base name :"
  5120 = "Illegal characters in filename"

  5101 = 10
  5102 = 11



####################################################
# EAC Dialogs - WAV Compare (Process WAV)
####################################################

 11100 = "WAV Compare"

  9205 = "Current wave file"
  9206 = "WAV file : "
  9207 = "Error type "
  9208 = "Position"
  9209 = "Error type"
  9210 = "Position"
 11101 = "Replace"
 11120 = "  missing sample"
 11121 = "  missing samples"
 11122 = "  repeated sample"
 11123 = "  repeated samples"
 11124 = "different samples"
 11126 = "Replacing"

 11125 = 11101
  9104 = 10



####################################################
# EAC Dialogs - Transfer (freedb)
####################################################

  4700 = "Transfer"

  4703 = "CD Identification"
  4704 = "Accessing freedb"
  4710 = "Status :"
  4702 = " Connecting to Internet..."
  4720 = "Invalid server address"
  4721 = " Done"
  4722 = " Canceled"

  4701 = 11



####################################################
# EAC Dialogs - Copy Range
####################################################

  2500 = "Extracting Audio Data"

   833 = "Copy Selected Range"
   813 = "Filename :"
   815 = "Progress"
  2510 = "Track"
  2511 = "Speed"
  2512 = "Time"
  2513 = "Est. Remaining"
  2514 = "Status"
  2515 = "Error correction :"
   822 = "Shut down computer after extraction finished "
   823 = "Reset computer after extraction finished "
   824 = "Hibernate computer after extraction finished "

  2520 = "Testing Audio Data"
  2521 = "Test Track"
  2522 = "Track  :"
  2523 = "Do you really want to cancel extraction ?"
  2524 = "     Canceled - Waiting For External Compressor"
  2525 = "Do you really want to skip this track ?"
  2526 = "     Skipped - Waiting For External Compressor"
  2527 = "     Skipped Track"
  2528 = "Audio Extraction Canceled"
  2529 = "Audio Extraction Complete"

   811 = 11



####################################################
# EAC Dialogs - Copy Range Selection
####################################################

 1400 = "Copy Range"

 1420 = "Select Start Position"
 1419 = "Select End Position"
 1407 = "Block :"
 1409 = "Track :"
 1411 = "Relative Timepos : "
 1432 = "Snap Gap"
 1440 = "Snap Track"
 1425 = "Play Position :"
 1402 = "Total Length :"
 1401 = "Total Space Required : "

 1413 = 1407
 1415 = 1409
 1417 = 1411
 1434 = 1432
 1441 = 1440
 1427 = 1409
 1428 = 1411
 1403 = 10
 1404 = 11



####################################################
# EAC Dialogs - Correct DC Offset
####################################################

 11000 = "Correct DC Offset"

 11010 = "Left channel"
 11011 = "Right channel"
 11006 = "values"
 11005 = "Autodetect"
 11020 = "Detect DC Offset"
 11021 = "Detecting DC Offset"

 11007 = 11006
 11001 = 10
 11002 = 11



####################################################
# EAC Dialogs - Maximum dB peak level
####################################################

 10300 = "Maximum dB peak level"

 10304 = "Play"
 10320 = "Wave Audio used by another application"
 10321 = "Wave Audio MCI error"

 10310 = 11010
 10311 = 11011
 10305 = 10304
 10303 = 10



####################################################
# EAC Dialogs - Drive C2 Feature Test
####################################################

 13100 = "Drive C2 Feature Test"

 13110 = "Detecting C2 Feature"
 13111 = "Status :"
 13101 = " Searching C2 Errors..."
 13112 = "Progress :"
 13113 = "Please note :"
 13114 = "For this test you need a bad CD (e.g. a CD with "+
         "a lot of scratches). EAC tries to locate at least "+
         "one error position. If the drive is C2 capable, "+
         "it will report a C2 error somewhere on such a CD."

 13103 = 11



####################################################
# EAC Dialogs - Compression Sample Offset
####################################################

 10100 = "Compression Sample Offset"

 10110 = "Offset :"
 10102 = " Detecting..."
 10120 = "Finished"
 10121 = " No sound information found !"
 10122 = " Error on compression / decompression !"
 10123 = " Can't create test file !"

 10103 = 12
 10101 = 10



####################################################
# EAC Dialogs - Analyzing Gaps
####################################################

  3600 = "Analyzing"

  3609 = "Detecting Pre-Track Gaps"
  3601 = "Track  1"
  3610 = "Track"
  3611 = "Detecting Gaps"
  3612 = "Detecting Track Indices"
  3613 = "Index"
  3614 = "Detecting Indices"
  3615 = "Detecting UPC/ISRC"
  3616 = "Detecting UPC"
  3617 = "ISRC Track "
  3618 = "Detecting ISRCs"
  3619 = "Analyzing Session Separation"
  3620 = "Analyzing Lead-Out"
  3621 = "Detecting Layout"
  3622 = "Detecting Tracks"

  3602 = 11



####################################################
# EAC Dialogs - Detect Write Features
####################################################

 13000 = "Write Features"

 13010 = "Detecting Write Features"
 13011 = "UPC/ISRC Support :"
 13012 = "CD-Text Support :"
 13020 = " Canceled"
 13021 = " No"
 13022 = " Yes"

 13003 = 12
 13004 = 10



####################################################
# EAC Dialogs - Echo Options
####################################################

 11700 = "Echo Options"

 11710 = "Echo delay"
 11711 = "Echo volume"

 11701 = 10
 11702 = 11



####################################################
# EAC Dialogs - Edit CUE sheet
####################################################

 13900 = "Edit CUE sheet"

 13920 = "Error in CUE sheet !\n\n"
 13921 = "File read error"
 13922 = "File does not exist : "
 13923 = "File open error"
 13924 = "Not enough arguments in line "
 13925 = "Too many arguments in line "
 13926 = "CATALOG string has wrong length in line "
 13927 = "FLAGS command may only be used once between TRACK "+
         "and INDEX in line "
 13928 = "Unknown FLAGS parameter occurred in line "
 13929 = "ISRC string has wrong length in line "
 13930 = "ISRC string contains illegal characters in line "
 13931 = "No TRACK defined for ISRC in line "
 13932 = "Bad time format in line "
 13933 = "PREGAP of a track must be used first after TRACK "+
         "in line "
 13934 = "No FILE specified up to PREGAP command in line "
 13935 = "No TRACK specified up to PREGAP command in line "
 13936 = "PREGAP can only be used before the first INDEX of a "+
         "file in line "
 13937 = "POSTGAP of a track must be used after all INDEXes "+
         "in line "
 13938 = "Only POSTGAP per TRACK allowed in line "
 13939 = "No TRACK specified up to POSTGAP command in line "
 13940 = "Bad INDEX number in line "
 13941 = "INDEX numbers must increase by one in line "
 13942 = "No INDEXes allowed after POSTGAP in line "
 13943 = "Positions must be in ascending order in line "
 13944 = "First INDEX of a FILE must be at 00:00:00 in line "
 13945 = "There is no FILE specified for this INDEX in line "
 13946 = "INDEX position is behind end of FILE in line "
 13947 = "First INDEX of a track must be either 0 or 1 in line "
 13948 = "Bad TRACK number in line "
 13949 = "TRACK numbers must increase by one in line "
 13950 = "Not an audio track in line "
 13951 = "Only 'WAVE' and 'MP3' format is supported in line "
 13952 = "File does not exist in line "
 13953 = "File type is not supported in line "
 13954 = "Unknown keyword in line "

 13901 = 10
 13902 = 11



####################################################
# EAC Dialogs - CD Information
####################################################

  3700 = "CD Information"

  3711 = "CD title"
  3712 = "Year of release"
  3713 = "General music style"
  3714 = "Specific music style"
  3710 = "Extended"
  3715 = "First track number"
  3720 = "Remove cover image"


####################################################
# EAC Dialogs - CUE Sheet Excerpt
####################################################

 14400 = "CUE Sheet Excerpt"

 14401 = "List of CUE points"
 14407 = "Track"
 14408 = "Index"
 14409 = "Time"
 14404 = "Delete"
 14406 = "Set Time"
 14405 = "Edit Time"
 14402 = "Close"
 14420 = "First time marker has to be on position "+
         "00:00.00 !"
 14421 = "Time marker overlaps with previous or "+
         "next time marker !"
 14422 = "First time marker can't be changed; it has "+
         "to be on position 00:00.00 !"
 14423 = "First time marker can't be deleted; it has "+
         "to be on position 00:00.00 !"



####################################################
# EAC Dialogs - Sample Value
####################################################

 10600 = "Sample Value"



####################################################
# EAC Dialogs - Equalize
####################################################

 11300 = "Equalize"

 11330 = "Frequency Gain"
 11331 = "Master Gain"
 11316 = "Reset Values"

 11310 = 10
 11311 = 11



####################################################
# EAC Dialogs - CD Write
####################################################

 14000 = "CD Write"

 14008 = "Done :"
 14009 = "Est. Remaining :"
 14020 = "Erase CD-RW"
 14021 = "Preparing"
 14022 = "Erasing CD-RW"
 14023 = "Preparing to Erase CD-RW"
 14024 = "Erasing successfully finished !"
 14025 = "Errors occurred on erasing !"
 14026 = "CD Write Simulation"
 14027 = "CD Write"
 14028 = "(Using BurnProof)"
 14029 = " Writing Lead-In"
 14030 = " Calibrating Write Power"
 14032 = " Writing Lead-Out"
 14033 = " Writing Track "
 14034 = "Writing CD"
 14035 = "Write error !        \n\n"
 14036 = "Write successfully finished"
 14037 = "Simulation successfully finished"
 14038 = "Canceling the write process will result in an incomplete CD !\n\n"+
         "Do you really want to cancel ? "

 12316 = 11



####################################################
# EAC Dialogs - Information
####################################################

  4500 = "Information"

  4501 = "This beta version of Exact Audio Copy is rather "+
         "old. Please get a new copy from "

  4503 = 10


####################################################
# EAC Dialogs - Extended Information
####################################################

  5000 = "Extended Information"

  5004 = "Extended CD information for Track "
  5020 = "Extended CD information"

  5003 = 10
  5002 = 11



####################################################
# EAC Dialogs - Extracting Audio Data
####################################################

   800 = "Extracting Audio Data"

   890 = "Copy Track"
   891 = "Track Progress"
   816 = "Total Progress"
   844 = "Total"
   818 = "Skip Track"
   860 = "Direct Compression"
   861 = "WAV Compression"
   862 = "Skip File"
   863 = "Compressing Audio Data"
   864 = "Compressing"
   865 = "Current :"
   866 = "Do you really want to cancel compression ?"
   869 = "Do you really want to skip this file ?"
   867 = "Compression Canceled"
   868 = "Compression Complete"
   870 = "     Skipped File"
   871 = "     Compress Track By External Program"
   872 = "Compressing"
   873 = "Compressing File"
   874 = "     File Write Error !"
   875 = "     Can't Open Selected CODEC !"
   876 = "     File Creation Error !"
   877 = "     File Open Error !"
  2567 = "Can't Open Selected CODEC !"
   878 = "Decompressing"
   879 = "Decompressing File"
   880 = "WAV Decompression"
   881 = "Decompressing Audio Data"
   882 = "Decompressing"
   883 = "Do you really want to cancel decompression ?"
   884 = "Decompression Canceled"
   885 = "Decompression Complete"
   886 = "Can't write ID3 tag to file"
  2550 = "Detection mode not possible for this drive"
  2551 = "Filename construct does not contain any track number '%tracknrx%'"
  2553 = "Save Waveform"
  2554 = "Burst mode"
  2555 = "Fast mode"
  2561 = "Secure mode"
  2556 = "Can't find a matching read mode!"
  2563 = "Can't find a matching C2 read mode!"
  2557 = "File already exists !\n\nOverwrite file with new content ?"
  2558 = "File Creation Error !"
  2559 = "Copy Selected Range"
  2568 = "Test Selected Range"
  2560 = "     Spin Up Drive"
  2562 = "Probably not enough disk space !\n\nDo you want to continue ?"
  2564 = "Test Track "
  2565 = "Copy Track "
  2566 = ", Index "

  2552 = 31
   840 = 2510
   841 = 2511
   842 = 2512
   843 = 2513
   848 = 2514
   820 = 2515
   845 = 841
   846 = 842
   847 = 843



####################################################
# EAC Dialogs - Fade
####################################################

 11500 = "Fade"

 11510 = "Start value :"
 11511 = "End value :"
 11507 = " Logarithmic fade "

 11501 = 10
 11502 = 11



####################################################
# EAC Dialogs - Analyzing
####################################################

  8200 = "Analyzing"

  8219 = "Detecting CD-ROM drive features"
  8202 = "Caching :"
  8201 = "Accurate Stream :"
  8212 = "C2 Error Info :"
  8205 = "Please wait !  Calculation could take some minutes !"
  8206 = "Do not produce load while detecting features !"
  8208 = "Information :"
  8209 = "Whereas the 'Accurate Stream' feature is useful for "+
         "audio extraction, the 'Caching' feature will make exact "+
         "extraction even more complicated and insecure !"

  8214 = 12
  8207 = 11



####################################################
# EAC Dialogs - Database Submission
####################################################

 14700 = "Database Submission"

 14704 = "After detecting these drive features, please "+
         "submit the results to the EAC drive features database. "+
         "This way you can help users that are not able to "+
         "determine their drive's features."
 14705 = "Even if you don't know if the detected values are correct, "+
         "please send the data, as all values are merged, so that "+
         "the results of different users can be verified. Of course "+
         "the results will be integrated in the next version of EAC."
 14706 = "Of course no personal data will be stored in the database, "+
         "nor will any information be used for any other purpose than for "+
         "statistical analysis."
 14707 = "May EAC send the retrieved drive features to the EAC database?"
 14703 = " Do not ask again, always deny request "

 14701 = 15
 14702 = 16



####################################################
# EAC Dialogs - Flange Options
####################################################

 12000 = "Flange Options"

 12015 = "Flange period"
 12016 = "Flange delay"
 12017 = "Flange volume"



####################################################
# EAC Dialogs - Frequency Analysis
####################################################

 10900 = "Frequency Analysis"

 10909 = "Cursor position"
 10910 = "FFT size"
 10907 = " Logarithmic view "
 10911 = "Window function"

 10901 = 10



####################################################
# EAC Dialogs - Analyzing
####################################################

  8400 = "Analyzing"

  8409 = "Testing gaps on silence"
  8404 = "Gap before track"
  8407 = "Length"
  8405 = "Silence"
  8406 = "Peak Level"

  8402 = 11



####################################################
# EAC Dialogs - Glitch Removal
####################################################

 10400 = "Glitch Removal"

 10405 = "Sensibility of glitch detection"
 10406 = "High"
 10407 = "Low"

 10402 = 10
 10403 = 11



####################################################
# EAC Dialogs - ID3 Tag Editor
####################################################

  9600 = "ID3 Tag Editor"

  9615 = "Filename :"
  9616 = "Title :"
  9617 = "Artist :"
  9618 = "Album :"
  9605 = "Comments :"
  9619 = "Year of release :"
  9611 = "Track number :"
  9620 = "Music style :"

  9613 = "Remark : This ID3 tag editor will only edit and "+
         "store ID3 V1 tags. If there are additional V2 tags in the file, "+
         "they remain unchanged. That way the two tags may show "+
         "different data! So in that case use a V2 editor to copy "+
         "the V1 to V2, or use it to directly edit both tags in "+
         "one go."

  9607 = 10
  9608 = 11



####################################################
# EAC Dialogs - Information
####################################################

  3300 = "Information"

  3302 = "Important Information"
  3303 = "Because many users don't understand how EAC works, "+
         "here is an important notice :"
  3306 = "If you want secure copies, you have to make sure "+
         "that you choose the correct secure reading mode depending "+
         "on your CD-ROM drive !  Otherwise read errors probably "+
         "will not be detected."
  3301 = " Show this information next time "

  3311 = 10



####################################################
# EAC Dialogs - Loop Recording
####################################################

 10700 = "Loop Recording"

 10710 = "Please select the amount of memory that should be used for recording"
 10711 = "Time available :"

 10703 = 10
 10704 = 11



####################################################
# EAC Dialogs - Loop Record WAV
####################################################

 10800 = "Loop Record WAV"

  9740 = "Record information"
  9741 = "Recorded time : "
  9742 = "Recorded space :"
  9749 = "Save to file..."
  9728 = "Determine last recording's peak level (in dB)"
  9743 = "Left"
  9744 = "Right"
  9745 = "Channel"

  9709 = 10



####################################################
# EAC Dialogs - Mix Properties
####################################################

 10500 = "Mix Properties"

 10512 = "Please select mixing ratio"
 10501 = " Lock start/end settings "
 10502 = "Start"
 10505 = "End"
 10510 = "Original"
 10511 = "Clipboard"

 10506 = 10
 10507 = 11



####################################################
# EAC Dialogs - Noise Reduction
####################################################

 11200 = "Noise Reduction"

 11210 = "Select noise reduction attenuation"
 11204 = " Create WAV from reduced noise "

 11202 = 10
 11203 = 11



####################################################
# EAC Dialogs - Information
####################################################

  8300 = "Information"

  8309 = "Exact Audio Copy couldn't detect a matching read "+
         "command for this CD-ROM drive."
  8308 = "You should try to activate the autodetection of the "+
         "read command in the drive options dialog."
  8301 = "If you have to select a specific read command -- e.g., "+
         "because autodetection hangs the system -- you should make "+
         "sure to select the correct one !"
  8304 = "Just experiment with these switches and if it still "+
         "does not work, please report your drive configuration."

  8307 = 10



####################################################
# EAC Dialogs - Analyzing WAV File
####################################################

  7400 = "Analyzing WAV File"

  7403 = "Progress"
  7420 = "Analyzing"
  7421 = "Comparing WAVs"
  7422 = "Saving Wave"
  7423 = "Saving WAV"
  7424 = "Cutting Wave"
  7425 = "Processing Wave"
  7426 = "Comparing WAVs"
  7427 = "Checking Audio File"
  7428 = "Seeking Audio File"
  7429 = "Generate CUE Sheet"
  7430 = "Saving Wave"
  7431 = "Copy Selection"
  7432 = "Undo"

  7401 = 11



####################################################
# EAC Dialogs - Analyzing
####################################################

  3800 = "Analyzing"

  3801 = "Detecting Overreading capability and Sample Offset"
  3812 = "Overread :"
  3802 = "Found CD :"
  3806 = "Sample Offset :"
  3813 = " Detecting..."
  3805 = "Please wait!  Calculation could take some minutes !"
  3811 = "Information :"
  3808 = "This calculation is not exact. To get better results, "+
         "you should start this detection several times in line and "+
         "select the best fitting value !"

  3814 = 12
  3803 = 11



####################################################
# EAC Dialogs - Overwrite Warning
####################################################

 14800 = 6

 14804 = "File already exists !"
 14805 = "Overwrite file with new content ?"
 14802 = "Yes to all"
 14806 = "No to all"

 14801 = 15
 14803 = 16



####################################################
# EAC Dialogs - Proxy Authentification
####################################################

  9400 = "Proxy Authentification"

  9401 = "Please enter your proxy password"
  9402 = "Proxy password :"

  9404 = 10



####################################################
# EAC Dialogs - Phaser Options
####################################################

 11900 = "Phaser Options"

 11901 = "Phaser delay"
 11902 = "Phaser volume"



####################################################
# EAC Dialogs - Playing Peak Range
####################################################

  8150 = "Playing"

  8151 = "Looping peak range"



####################################################
# EAC Dialogs - Pop Detection List
####################################################

  8900 = "Pop Detection"

  8901 = "List of detected pops"

  8903 = 10
  8904 = 11010
  8905 = 11011



####################################################
# EAC Dialogs - Pop Detection
####################################################

 11600 = "Pop Detection"

 11610 = "Pop Sensitivity"
 11611 = "Pop Length"
 11612 = "Long"
 11613 = "Medium"
 11614 = "Short"

 11601 = 10
 11602 = 11



####################################################
# EAC Dialogs - Possible Errors
####################################################

  4800 = "Possible Errors"

  4810 = "Please select track or range of suspicious positions"
  4807 = "Current position :"

  4802 = "Play"
  4805 = "Stop"
  4803 = "Glitch Removal"
  4820 = "Range"
  4821 = "Track"
  4822 = "Please select a track or an interval"
  4823 = "This procedure cannot be undone !\n\nDo you really want to continue ?"
  4824 = "File error"

  4804 = 10



####################################################
# EAC Dialogs - Insert Silence
####################################################

  8700 = "Insert Silence"

  8710 = "Number of null samples to be inserted :"
  8701 = "Length of silence :"

  8704 = 10
  8705 = 11



####################################################
# EAC Dialogs - Normalize Level
####################################################

  8600 = "Normalize Level"

  8601 = "Please enter level to normalize to"

  8602 = 10
  8603 = 11



####################################################
# EAC Dialogs - Sound Processing
####################################################

  7000 = "Sound Processing"

  7003 = "Filename :"
  7007 = "Peak Level :"
  7009 = "Checksum :"
   490 = "Zoom Range"
   487 = "Zoom Full"
   489 = "Zoom In"
   488 = "Zoom Out"
  7011 = "Selection startpos :"
  7013 = "Selection endpos :"
  7015 = "Selection length :"
  7030 = "Display startpos :"
  7031 = "Display endpos :"
  7050 = "Change Sample Value"
  7051 = "Changing Sample Value"
  7052 = "Do you really want to discard all changes ?"
  7053 = "Saving Wave"
  7054 = "It is not possible to save over the\n\ncurrent wave file. "+
         "Use 'Save' instead !"
  7055 = "Saving Selection"
  7056 = "Save Selection As"
  7057 = "Filename"
  7058 = "Append File"
  7059 = "Appending File"
  7060 = "The selected WAV file is no standard WAV !\n\n"+
         "EAC processes only uncompressed 44.1 kHz stereo WAVs !"
  7061 = "Paste Mix"
  7062 = "Pasting Mix"
  7063 = "Find & Replace"
  7064 = "Finding & Replacing"
  7065 = "Paste"
  7066 = "Pasting"
  7067 = "Delete Selection"
  7068 = "Deleting Selection"
  7069 = "Cut Selection"
  7070 = "Cutting Selection"
  7071 = "Delete Leading Silence"
  7072 = "Deleting Leading Silence"
  7073 = "Delete Ending Silence"
  7074 = "Deleting Ending Silence"
  7075 = "Trim Selection"
  7076 = "Trimming Selection"
  7077 = "Delete Leading & Ending Silence"
  7078 = "Deleting Leading & Ending Silence"
  7079 = "Silence"
  7080 = "Silencing"
  7081 = "Fade In"
  7082 = "Fading In"
  7083 = "Echo"
  7084 = "Echoing"
  7085 = "Phase"
  7086 = "Phasing"
  7087 = "Flange"
  7088 = "Flanging"
  7089 = "Reverb"
  7090 = "Reverbing"
  7091 = "Invert"
  7092 = "Inverting"
  7093 = "Replace from file"
  7094 = "Replacing"
  7095 = "Reverse"
  7096 = "Reversing"
  7097 = "Copying Selection"
  7098 = "Fade Out"
  7099 = "Fading Out"
  7150 = "Fade"
  7151 = "Fading"
  7152 = "Interpolate Linear"
  7153 = "Interpolating Linear"
  7154 = "Smooth"
  7155 = "Smoothing"
  7156 = "Remove Glitches"
  7157 = "Removing Glitches"
  7158 = "Create Profile"
  7159 = "Creating Profile"
  7160 = "Equalize"
  7161 = "Equalizing"
  7162 = "Correct DC Offset"
  7163 = "Correcting DC Offset"
  7164 = "Noise Profile"
  7165 = "Open Noise Reduction Profile"
  7166 = "Save Noise Reduction Profile"
  7167 = "Reduce Noise"
  7168 = "Reducing Noise"
  7169 = "Detect Pops"
  7170 = "Detecting Pops"
  7171 = "Interpolate"
  7172 = "Interpolating"
  7173 = "Insert Silence"
  7174 = "Inserting Silence"
  7175 = "Normalize"
  7176 = "Normalizing"
  7190 = "The profile belongs to a different version of EAC and can not be loaded !"

  7019 = 488



####################################################
# EAC Dialogs - Create New Profile
####################################################

 17200 = "Create New Profile"

 17205 = "Please enter the name of the profile to be created."

 17229 = "Please select below which set of options "+
         "should be stored in the created profile"

 17216 = " All EAC options "
 17217 = " Drive options "
 17218 = " Extraction options "
 17219 = " Wave editor options "
 17220 = " Compression options "

 17240 = "  (Complete)"
 17241 = "  (Drive)"
 17242 = "  (Extraction)"
 17243 = "  (Wave editor)"
 17244 = "  (Compression)"

 17203 = 10
 17204 = 11



####################################################
# EAC Dialogs - Compression Queue Control Center
####################################################

 18000 = "Compression Queue Control Center"

 18002 = " Make all compression tasks sleep "
 18003 = "Delete Task(s)"
 18005 = "Update List"
 18010 = "Filename"
 18011 = "Path"
 18012 = "Do you really want to delete the selected tasks ?"
 18013 = "Do you really want to delete the selected\n\n"+
         "tasks and the according WAV files ?"

 18004 = 10



####################################################
# EAC Dialogs - Record WAV
####################################################

  9700 = "Record WAV"

  9726 = "Free time left on device :"
  9750 = "Free space left on device :"
  9729 = "Filename :"
  9702 = "Start record"
  9703 = "Stop record"
  9701 = "Select target filename..."
  9760 = "Can't open record device !"
  9761 = "Recording  "
  9762 = "Record"
  9763 = "Select Waveform Filename"



####################################################
# EAC Dialogs - Glitch Removal
####################################################

  5400 = "Glitch Removal"

  5410 = "Progress"
  5406 = "Left channel"
  5407 = "Right channel"
  5403 = "Number of removed glitches : "
  5420 = "Glitch Removal"
  5421 = "Do you really want to cancel filtering ?"

  5402 = 11



####################################################
# EAC Dialogs - Reverb
####################################################

 11800 = "Reverb"

 11821 = "Reverb delays"
 11822 = "Reverb volumes"

 11801 = 10
 11802 = 11



####################################################
# EAC Dialogs - Automatic Search
####################################################

 17100 = "Automatic Search"

 17105 = "EAC will now try to locate the installation place of your "+
         "latest LAME.EXE automatically. If you have not installed "+
         "LAME.EXE yet or if you want to specify the location manually, "+
         "you may cancel this procedure."
 17106 = "Search position :"

 17102 = 11



####################################################
# EAC Dialogs - Select CD
####################################################

 14900 = "Select CD"

 14905 = "Several exact matches found, please select correct CD :"

  4902 = 10
  4903 = 11



####################################################
# EAC Dialogs - Select CD
####################################################

  4900 = "Select CD"

  4905 = "Inexact matches found, please select correct CD :"




####################################################
# EAC Dialogs - Edit Lyrics
####################################################

 19000 = "Edit track lyrics"

 19001 = 10
 19003 = 11



####################################################
# EAC Dialogs - Shutdown Warning
####################################################

 12800 = "Shutdown Warning"

 12805 = "The computer will be shut down in"
 12806 = "seconds !"
 12807 = "Press Cancel to prevent the shutdown and to return to EAC."

 12810 = "Restart Warning"
 12815 = "The computer will restart in"
 12817 = "Press Cancel to prevent the restart and to return to EAC."
 
 12820 = "Hibernation Warning"
 12825 = "The computer will hibernate in"
 12827 = "Press Cancel to prevent the hibernation and to return to EAC."



####################################################
# EAC Dialogs - Status and Error Messages
####################################################

  1200 = "Status and Error Messages"

  2501 = "Track status and errors"
  1203 = "Possible Errors"
  1204 = "Create Log"
  1210 = "Range status and errors"
  1211 = "Selected range"
  1212 = "     Timing problem "
  1213 = "     Suspicious position "
  1214 = "     Missing samples"
  1215 = "     Too many samples"
  1216 = "     File write error"
  1217 = "     Peak level "
  1299 = "     Extraction speed "
  1218 = "     Range quality "
  1219 = "     CRC "
  1220 = "     Copy OK"
  1221 = "     Copy finished"
  1227 = "     Track quality "
  1228 = "     Copy aborted"
  1269 = "     Filename "
  1270 = "     Pre-gap length "
  1271 = "     Test CRC "
  1272 = "     Copy CRC "
  1273 = "     Compressing"
  1280 = "     Track not fully ripped for AccurateRip lookup"
  1281 = "     Accurately ripped (confidence "
  1282 = "     Not accurately ripped (confidence "
  1283 = "     Track not present in AccurateRip database"
  1330 = "     Cannot be verified as accurate"
  1337 = "cannot be verified as accurate"
  1331 = ", AccurateRip returned"
  1332 = "(confidence "
  1333 = "No tracks could be verified as accurate"
  1334 = "You may have a different pressing from the one(s) in the database"
  1335 = "Some tracks could not be verified as accurate"
  1336 = "All tracks accurately ripped"
  1338 = "Null samples used in CRC calculations"
  1339 = "track(s) not present in the AccurateRip database"
  1340 = "track(s) accurately ripped"
  1341 = "track(s) could not be verified as accurate"
  1342 = "track(s) not fully ripped for AccurateRip lookup"
  1343 = "track(s) canceled"
  1344 = "None of the tracks are present in the AccurateRip database"
  1284 = "Not all tracks ripped accurately"
  1222 = "No errors occurred"
  1223 = "Review Range"
  1224 = "There were errors"
  1225 = "End of status report"
  1325 = "Log checksum"
  1226 = "Track"
  1230 = "Index"
  1229 = "Review Tracks"
  1274 = "EAC extraction logfile from "
  1240 = "January"
  1241 = "February"
  1242 = "March"
  1243 = "April"
  1244 = "May"
  1245 = "June"
  1246 = "July"
  1247 = "August"
  1248 = "September"
  1249 = "October"
  1250 = "November"
  1251 = "December"
  1232 = "EAC extraction log file"
  1233 = "Used drive  : "
  1234 = "Read mode"
  1235 = "Burst"
  1236 = "Fast"
  1237 = "Paranoid"
  1238 = "Secure with NO C2, accurate stream, NO disable cache"
  1239 = "Secure with NO C2, NO accurate stream, disable cache"
  1252 = "Secure with C2, accurate stream, NO disable cache"
  1253 = "Secure with C2, accurate stream, disable cache"
  1254 = "Secure with NO C2, accurate stream, disable cache"
  1255 = "Combined read/write offset correction"
  1256 = "Read offset correction"
  1257 = "Overread into Lead-In and Lead-Out"
  1258 = "Used output format"
  1259 = "Additional command line options"
  1260 = "Internal WAV Routines"
  1261 = "44.100 Hz; 16 Bit; Stereo"
  1262 = "Use compression offset"
  1263 = "Other options      : "
  1264 = "Fill up missing offset samples with silence"
  1265 = "Delete leading and trailing silent blocks"
  1266 = "Normalize to"
  1267 = "Native Win32 interface for Win NT & 2000"
  1268 = "Installed external ASPI interface"
  1275 = "AccurateRip summary"
  1276 = "not ripped completely"
  1277 = "accurately ripped (confidence "
  1278 = "not ripped accurately (confidence "
  1279 = "not present in database"
  1285 = ", but should be"
  1286 = "Performing a test extraction only"
  1287 = "Sectors"
  1288 = "Exact Audio Copy"
  1289 = "TOC of the extracted CD"
  1290 = "Track"
  1291 = "Start"
  1292 = "Length"
  1293 = "Start sector"
  1294 = "End sector"
  1295 = "Secure"
  1296 = "Make use of C2 pointers"
  1297 = "Utilize accurate stream"
  1298 = "Defeat audio cache"
  1305 = "Used interface"
  1306 = "Command line compressor"
  1307 = "Selected bitrate"
  1308 = "Quality"
  1328 = "High"
  1329 = "Low"
  1309 = "Add ID3 tag"
  1310 = "Sample format"
  1320 = "Gap handling"
  1321 = "Not detected, thus appended to previous track"
  1322 = "Appended to previous track"
  1323 = "Appended to next track"
  1324 = "Left out"

  1201 = 10



####################################################
# EAC Dialogs - Determine CD-R Capacity
####################################################

 12400 = "Determine CD-R Capacity"

 12404 = "Position :"
 12405 = "Estimated time :"

 12402 = 11



####################################################
# EAC Dialogs - Index Edit
####################################################

 13200 = "Index Edit"

 13220 = "Track :"
 13221 = "Index :"
 13214 = "Relative time :"
 13215 = "Absolute time :"
 13211 = "Track ISRC :"
 13207 = " Copy protected "
 13208 = " Pre-emphasis "
 13230 = "Gap length :"
 13231 = "Illegal characters in ISRC !"
 13232 = "Length of ISRC is not correct !"
 13233 = "Time position intersects with previous index !"
 13234 = "Time format of absolute time is not correct !"
 13235 = "Time format of gap length is not correct !"
 13236 = "Time format of relative time is not correct !"

 13209 = 10
 13210 = 11



####################################################
# EAC Dialogs - Edit extended track informations
####################################################

  5200 = "Edit extended track information"

  5205 = "Please select track"
  5202 = "Extended"
  5220 = "Track "

  5201 = 10



####################################################
# EAC Dialogs - WAV Compare
####################################################

  9100 = "WAV Compare"

  9220 = 9206



####################################################
# EAC Dialogs - Wizard Autodetection
####################################################

 17000 = "Autodetection"



####################################################
# EAC Dialogs - CD Write
####################################################

 12300 = "CD Write"

 12317 = "Track :"
 12318 = "CD :"
 12303 = "Status :"
 12319 = "Buffer :"
 12302 = "Written :"
 12306 = "Speed :"
 12320 = "Time :"
 12321 = "Est. Remaining :"



####################################################
# EAC Dialogs - CD Write Options
####################################################

 12600 = "CD Write Options"

 12612 = "Free space on CD :"
 12613 = "Space needed for current job :"
 12614 = "First track number to be written :"
 12620 = "No Test Write"
 12621 = "Only Test Write"
 12622 = "Close CD"
 12623 = "Leave CD open"
 12624 = "Can't determine write speeds !  "
 12625 = "Nothing to write !    "
 12626 = "This CD has no space left !  "
 12627 = "There is no writable CD in drive !  "
 12628 = "At least one track is shorter than 4 seconds,\n\n"+
         "which is illegal for audio CDs !\n\n"+
         "Do you want to ignore this limitation ?"
 12629 = "This '"
 12630 = "' CD-R has a tested maximum capacity"
 12631 = "\n\nof "
 12632 = " ! You want to write more than the tested maximum limit !\n\n"+
         "Do you really want to continue ?"
 12633 = "You want to write more data on this untested CD-R than allowed.\n\n"+
         "This could result in a incomplete CD !\n\n"+
         "Do you really want to continue ?"
 12634 = "The decompression of some tracks could be slower     \n\n"+
         "than the selected writing speed !\n\n"+
         "Do you want to continue anyway ?";

 12611 = 13803
 12602 = 13804
 12603 = 13805



####################################################
# EAC Dialogs - Writer Drive Selection
####################################################

 14300 = "Writer Drive Selection"

 14302 = "CD-R drive :"
 14301 = "Please make sure that an empty CD-R/CD-RW is inserted in "+
         "the selected drive before you continue to choose "+
         "further write options."



####################################################
# Splash Dialog - Please wait
####################################################

 19201 = "Exact Audio Copy is starting up..."
 19202 = "Please wait!"




# Now the menus of EAC need translation.
# There are some specialities with translating
# menus. Most menus will have some special codes
# in them. The first special code is '\t', which
# usually stands at the end of string, followed
# by a textual description of the connected
# shortcut of that function.
# Please note : If you change the keys here in
# the text file, it will have no change in the
# actual program. The shortcut will be still the
# same, but EAC will show the wrong shortcut when
# the menu is displayed!! So do not change the
# shortcuts -- it will not really change anything!
# The '\t' is usually a TAB character, so that the
# shortcut is aligned to the right.
# The other special character is the '&' character.
# It is used for navigating menus by the keyboard.
# (When the menu is displayed, the character that
# follows the '&' is underlined, and that character
# can be used to activate that action.)
# e.g. "&EAC Options...\tF9" will result into something
# like
# _E_AC Options...      F9
# (The underline is not possible in a pure text file,
# so it looks this way...)
# You may (or sometimes must) change these '&'
# referenced shortcuts, as in each menu (or submenu)
# no two menu entries may use the same character
# referenced by the '&'.
#
# The numbers of the resources have a special format.
# The first digit stands for the menu. There is a
# '2' for the EAC menu, a '3' for the beginner EAC
# menu, a '4' for the Process WAV File menu, etc.
# The second digit denotes the row of the menu:
# a '0' is the leftmost menu, '1' is the menu that
# is right of the one with '0' at that position.
# On EAC's main menu, the "EAC" menu list has a '0',
# the "Edit" menu list has a '1', the "Action"
# menu list has a '2', and so on.
# The next two digits are one number that tells
# at which position the menu entry the text/item
# is displayed. '00' is the menu list identifier
# in the menu bar. '01' is the first item on that
# menu.
# The last two digits are usually '00'. If a menu
# item has a submenu (a menu that is shown, when
# that menu item is selected), it will continue
# with values beginning with '01' and so on.
# If you don't know exactly where the string is,
# compare these with the actual application.



####################################################
# EAC Menus - EAC
####################################################

200000 = "EA&C"

200100 = "&EAC Options...\tF9"
200200 = "&Drive Options...\tF10"
200300 = "&Compression Options...\tF11"
200400 = "&Metadata Options...\tF12"
200500 = "&WAV Editor Options...\tAlt+Q"

200700 = "Conf&iguration Wizard..."

200800 = "&Profiles"
200801 = "&Load Profile...\tShift+F1"
200802 = "&Save Profile...\tShift+F2"

201000 = "E&xit\tAlt+F4"



####################################################
# EAC Menus - Edit
####################################################

210000 = "&Edit"

210100 = "Select &All\tCtrl+A"
210200 = "&Invert Selection\tCtrl+I"
210400 = "Rename Track\tF2"
210600 = "S&huffle\tCtrl+H"

210700 = "&Sort"
210701 = "By &Track Number\tCtrl+S"
210702 = "By &Name\tCtrl+N"
210703 = "By &Length\tCtrl+L"



####################################################
# EAC Menus - Action
####################################################

220000 = "&Action"

220100 = "&Copy Selected Tracks"
220101 = "Uncompressed...\tF5"
220102 = "Compressed...\tShift+F5"

220200 = "Test && C&opy Selected Tracks"
220201 = "Uncompressed...\tF6"
220202 = "Compressed...\tShift+F6"

220300 = "Copy Range"
220301 = "Uncompressed...\tF7"
220302 = "Compressed...\tShift+F7"

220400 = "&Test Selected Tracks\tF8"

220500 = "Copy &Image && Create CUE Sheet"
220501 = "Uncompressed...\tAlt+F7"
220502 = "Compressed..."

220600 = "Test && Copy Image && Create CUE Sheet"
220601 = "Uncompressed..."
220602 = "Compressed..."

220700 = "Catalog Selected Trac&ks"
220701 = "Uncompressed...\tAlt+F"
220702 = "Compressed...\tAlt+Shift+F"

220800 = "Copy Selected Tracks Index-&Based"
220801 = "Uncompressed...\tAlt+X"
220802 = "Compressed...\tAlt+Shift+X"

221000 = "&Detect Gaps\tF4"
221100 = "Test &Gaps On Silence\tF3"

221200 = "Create CUE &Sheet"
221201 = "C&urrent Gap Settings..."
221203 = "&Single WAV File...\tAlt+S"
221204 = "Multiple WAV Files With Gaps...  (Noncompliant)"
221205 = "Multiple WAV Files With &Leftout Gaps...\tAlt+M"
221206 = "Multiple WAV Files With &Corrected Gaps...\tAlt+O"

221400 = "L&eave Out Gaps"
221500 = "&Append Gaps To Previous Track (default)"
221600 = "A&ppend Gaps To Next Track"



####################################################
# EAC Menus - Database
####################################################

230000 = "&Database"

230100 = "&Edit CD Information..."
230200 = "Edit Extended &Track Information...\tAlt+T"
230300 = "Clear Current CD &Information...\tShift+Del"

230400 = "Clear &Current CRC Values"
230401 = "&Read CRC"
230402 = "&Test CRC"
230403 = "&Both CRCs"

230500 = "Tr&ansform Current CD Information"
230501 = "&Upper All First Characters"
230502 = "&Lower All Characters"
230503 = "&Split Track Information To Artist/Title"
230504 = "&Exchange Artist <-> Title"
230505 = "&Remove Unwanted Spaces"

230700 = "&Get CD Information From"
230701 = "&Remote Metadata Provider\tAlt+G"
230702 = "CD-&TEXT"
230703 = "CD&PLAYER.INI"
230704 = "&Clipboard\tShift+Ctrl+V"

230800 = "Get &Lyrics From Metadata Provider\tAlt+L"

230900 = "&Process Batch Metadata Queries\tAlt+P"
231000 = "&Submit CD Information To Metadata Provider\tAlt+U"

231100 = "Export CD Information To"
231101 = "&Clipboard\tCtrl+D"
231102 = "&Text File..."
231103 = "&DB Text File..."
231104 = "CD&PLAYER.INI"
231105 = "&.CDT File"

231200 = "Export Whole Database To"
231201 = "CD&PLAYER.INI"
231202 = "&DB Text File..."

231300 = "&Browse Database..."
231400 = "Import &Database..."

231600 = "Send Accurate&Rip Results..."


####################################################
# EAC Menus - Tools
####################################################

240000 = "&Tools"

240100 = "&Write CD-R...\tAlt+W"
240200 = "Cop&y CD...\tAlt+Y"
240400 = "&Process WAV...\tCtrl+E"
240500 = "&Compare WAVs...\tCtrl+W"

240600 = "&Split WAV By CUE Sheet"
240601 = "With &Gaps"
240602 = "With Gaps &Corrected"
240603 = "&Leave Out Gaps"
240604 = "Individual &Indices"

240700 = "Remove &Gaps From TAO Images"

240900 = "&Record WAV...\tAlt+R"
241000 = "&Loop Record WAV...\tAlt+Z"
241200 = "C&ompress WAVs...\tAlt+V"
241300 = "&Decompress...\tAlt+B"

241500 = "Co&mpression Queue Control Center\tCtrl+Q"


####################################################
# EAC Menus - Help
####################################################

250000 = "&Help"

250100 = "&About EAC..."

250300 = "&Internet Links"
250301 = "&EAC"
250302 = "&Tips && Specs"
250303 = "&What's New"
250304 = "&FAQ"
250306 = "free&db"
250307 = "&LAME Encoder"
250308 = "LAME For &Windows I"
250309 = "&OggVorbis Encoder"
250310 = "&FLAC Lossless Encoder"
250311 = "&Monkey's Audio Encoder (APE)"

250500 = "&Help\tF1"



####################################################
# EAC Menus - EAC
####################################################

300100 = 200100
300200 = 200200
300300 = 200300
300400 = 200400
300500 = 200500

300700 = 200700

300800 = 200800
300801 = 200801
300802 = 200802

301000 = 201000



####################################################
# EAC Menus - Edit
####################################################

310000 = 210000

310100 = 210100
310200 = 210200
310400 = 210400
310600 = 210600

310700 = 210700
310701 = 210701
310702 = 210702
310703 = 210703



####################################################
# EAC Menus - Action
####################################################

320000 = 220000

320100 = 220100
320101 = 220101
320102 = 220102

320200 = 220200
320201 = 220201
320202 = 220202

320300 = 220300
320301 = 220301
320302 = 220302

320400 = 220400

320500 = 220500
320501 = 220501
320502 = 220502

320600 = 220600
320601 = 220601
320602 = 220602

320800 = 221200
320801 = 221203
320802 = "Multiple WAV Files..."



####################################################
# EAC Menus - Database
####################################################

330000 = 230000

330100 = 230100
330200 = 230200
330300 = 230300

330400 = 230400
330401 = 230401
330402 = 230402
330403 = 230403

330500 = 230500
330501 = 230501
330502 = 230502
330503 = 230503
330504 = 230504
330505 = 230505

330700 = 230700
330701 = 230701
330702 = 230702
330703 = 230703
330704 = 230704

330800 = 230800

330900 = 230900
331000 = 231000

331100 = 231100
331101 = 231101
331102 = 231102
331103 = 231103
331104 = 231104
331005 = 231005

331200 = 231200
331201 = 231201
331202 = 231202

331300 = 231300
331400 = 231400

331600 = 231600


####################################################
# EAC Menus - Tools
####################################################

340000 = 240000

340100 = 240100
340200 = 240200
340400 = 240400
340500 = 240500

340600 = "&Split WAV By CUE Sheet..."
340700 = 240700

340900 = 240900
341000 = 241000
341200 = 241200
341300 = 241300

341500 = 241500


####################################################
# EAC Menus - Help
####################################################

350000 = 250000

350100 = 250100

350300 = 250300
350301 = 250301
350302 = 250302
350303 = 250303
350304 = 250304
350306 = 250306
350307 = 250307
350308 = 250308
350309 = 250309
350310 = 250310
350311 = 250311

350500 = 250500



####################################################
# Process Menus - File
####################################################

400000 = "&File"

400100 = "&Save"
400200 = "Save &As..."
400300 = "Save S&election As..."
400500 = "&Revert To Saved"
400700 = "&Append File..."
400900 = "&Exit"



####################################################
# Process Menus - Edit
####################################################

410000 = "&Edit"

410100 = "Und&o"
410300 = "Zero Crossing Adjustment"
410400 = "CD Sector Adjustment"
410600 = "&Select All"
410700 = "&Unselect All"
410900 = "&Copy"
411000 = "C&ut"
411100 = "&Paste"
411200 = "&Mix Paste..."
411300 = "Find && Replace"
411500 = "&Delete Selection"
411600 = "&Trim Selection"
411800 = "Silence Selection"
411900 = "&Insert Silence..."



####################################################
# Process Menus - Display
####################################################

420000 = "&Display"

420100 = "Spectral View"
420200 = "Update Display"

420400 = "Time Format"
420401 = "Decimal (h:mm:ss.ddd)"
420402 = "Decimal (ssss.ddd)"
420403 = "Samples"
420404 = "CD Sectors"

420500 = "Vertical Scale Format"
420501 = "Sample Values"
420502 = "Normalized Sample Values"
420503 = "Percentage"
420505 = "Automatic Range Selection"

420600 = "Use 'Spectrum Selection'"
420800 = "Frequency Analysis..."



####################################################
# Process Menus - Process File
####################################################

430000 = "&Process File"

430100 = "&Normalize..."
430200 = "&Correct DC Offset..."
430400 = "&Select Peak Range"
430500 = "&Play Peak Range"

430700 = "&Remove"
430701 = "&Leading Silence"
430702 = "&Ending Silence"
430703 = "Leading && Ending &Silence"

430800 = "&Add"
430801 = "Null Samples At &Beginning..."
430802 = "Null Samples At &End..."

431000 = "C&ompare With External WAV..."



####################################################
# Process Menus - Process Selection
####################################################

440000 = "Process &Selection"

440100 = "Remove &Glitches..."
440200 = "Detect &Pops..."

440300 = "In&terpolate Selection"
440301 = "&Replace Frequencies"
440302 = "&Linear"

440400 = "&Smooth Selection"
440500 = "Repla&ce From File..."

440700 = "Noise Pro&file"
440701 = "&Get From Selection"
440702 = "&Load From File..."
440703 = "&Save To File..."

440800 = "Reduce &Noise..."

441000 = "F&ade"
441001 = "Fade &In Linear"
441002 = "Fade &Out Linear"
441004 = "Fade In &Logarithmic"
441005 = "Fade O&ut Logarithmic"
441007 = "&Fade..."

441100 = "&Equalize..."
441300 = "&Invert"
441400 = "&Reverse"

441600 = "&Delay"
441601 = "&Echo..."
441602 = "&Phaser..."
441603 = "&Reverb..."
441604 = "&Flanger..."



####################################################
# Process Menus - CUE Sheet
####################################################

450000 = "&CUE Sheet"

450100 = "Load CUE Sheet..."
450200 = "Create new CUE Sheet"
450300 = "Save CUE Sheet..."

450500 = "Insert"
450501 = "Track Start"
450502 = "Gap Start"
450503 = "Index"

450600 = "Display CUE Sheet"
450800 = "Generate CUE Sheet"



####################################################
# Popup Menu - Main
####################################################

510000 = 220100
510100 = 220101
510200 = 220102

520000 = 220200
520100 = 220201
520200 = 220202

530000 = 220400

550000 = "Edit"
550100 = 210100
550200 = 210200
550400 = 210600

550500 = "Sort"
550501 = 210701
550502 = 210702
550503 = 210703

560000 = "CD Player Functions"
560100 = "Play"
560200 = "Pause"
560300 = "Stop"
560400 = "Next Title"
560500 = "Previous Title"

570000 = "Options"
570100 = 200200
570200 = 200100
570300 = 200300
570400 = 200400
570500 = 200500



####################################################
# CDWrite Menus - File
####################################################

600000 = "&File"

600100 = "&New CUE Sheet"
600300 = "&Load CUE Sheet..."
600400 = "&Save CUE Sheet..."
600600 = "&Edit CUE Sheet..."
600800 = "E&xit"



####################################################
# CDWrite Menus - Layout
####################################################

610000 = "&Layout"

610100 = "Append Files As New Track (Index &1) ..."
610200 = "Append Files As New Track (Index &0 && 1) ..."
610300 = "Append Files As New &Index..."
610500 = "&Edit Selected Indices..."
610600 = "Delete Selected I&ndices"
610800 = "Edit &CD Information..."
611000 = "&Add 2 Second Gap On Append"



####################################################
# CDWrite Menus - CD-R
####################################################

620000 = "&CD-R"

620100 = "&Write CD..."
620300 = "&Display CD-R Information..."
620400 = "&Test CD-R Capacity..."
620600 = "Quick Erase CD-RW..."



####################################################
# CDWrite Menus - File
####################################################

700000 = 600000

700100 = 600100
700300 = 600300
700400 = 600400
700600 = 600600
700800 = 600800



####################################################
# CDWrite Menus - Layout
####################################################

710000 = 610000

710100 = "Append Files As New &Track"
710300 = 610500
710400 = 610600
710600 = 610800
710800 = 611000



####################################################
# CDWrite Menus - CD-R
####################################################

720000 = 620000

720100 = 620100
720300 = 620300
720400 = 620400
720600 = 620600



####################################################
# Cover Image Menu
####################################################

810000 = "&Remove Cover Image"
820000 = "Get &New Image From Metadata Provider"
830000 = "&Save Cover Image To File"


####################################################
# All other resource strings
####################################################

 80000 = "Select compression options"

 80001 = "Unknown error"
 80002 = "Unknown ASPI error"

 80045 = "Unknown manufacturer"
 80046 = "Unknown type"

 80150 = "The specified directory does not exist !\n\n"+
         "Do you want to create it ?"
 80151 = "Please specify drive within path"
 80152 = "No path specified"

 80200 = "Unknown Artist"
 80201 = "Unknown Title"

 80250 = " Error - Initialization failed"
 80251 = " Error - Not able to resolve host name"
 80252 = " Error - Missing data in function"
 80253 = " Error - Can't connect host"
 80254 = " Error - Server not responding"
 80255 = " Error - freedb handshaking failed"
 80256 = " Error - Wrong WINSOCK.DLL version"
 80257 = " Error - Can't initialize WINSOCK.DLL"

 80258 = " Error - Cannot connect to server"
 80259 = " Requesting CD information..."
 80260 = " CD information found"
 80261 = " Error - Entry not found"
 80262 = " Error - Server error"
 80263 = " Several exact CD information found"
 80264 = " Inexact CD information found"
 80265 = " Error - CD not found in database"
 80266 = " Error - No handshake possible"
 80267 = " Requesting CD information..."
 80268 = " Query CD information"
 80269 = " Error - HTTP protocol failure"
 80270 = " Requesting valid sites..."
 80271 = " Error - No site information"
 80272 = " Closing Connecting..."
 80273 = " Error - Server timed out"
 80274 = " Error - Server not ready"
 80275 = " Error - Mail not accepted"
 80276 = "No music type selected"
 80277 = "Incorrect CD length information"
 80278 = "Problems with disc ID"
 80279 = "Incorrect CD artist name"
 80280 = "Incorrect CD title name"
 80281 = "Problems with disc title"
 80282 = "Problems with disc year"
 80283 = "Problems with disc extended genre"
 80284 = "Incorrect "
 80285 = ". track title name"
 80286 = "Incorrect extended CD information"
 80287 = "No valid CD"
 80288 = " Sending CD information..."
 80289 = " Information send"
 80290 = " Error - Information not accepted"
 80291 = " Error - No response"
 80292 = " Connecting freedb server..."
 80294 = " Connecting mail server..."

 80500 = "Save Waveform"
 80501 = "Detection mode not possible for this drive"
 80502 = 5321
 80503 = "CD information incompatible with freedb\n\n"
 80504 = "Are you really sure to submit this CD\n\n"+
         "to the selected metadata provider ?      "
 80505 = "Only HTTP submission possible"
 80506 = "Invalid freedb host information"
 80507 = "Select Files To Tag"
 80508 = "No Audio Data available"
 80509 = "Errors occurred on extraction !\n\n"+
         "Do you really want to continue ?      "
 80510 = "Save CUE Sheet"
 80511 = "Select First WAV"
 80512 = "Select Second WAV"
 80513 = 7060
 80514 = "Open Waveform"
 80515 = "There is not enough free main memory left on your system to process\n\n"+
         "the whole file. Do you want to continue nevertheless ?"
 80516 = "Not enough main memory !"
 80517 = "The selected WAV file is too short !\n\n"+
         "EAC processes only WAVs longer than 2 samples !"
 80518 = "Save CD Information"
 80519 = "No Audio Tracks selected"
 80520 = "No ASPI interface found !\n\n"+
         "Please refer to the documentation !"
 80521 = "Wave Files (*.wav)"
 80522 = "CD Database Files (*.dat)"
 80523 = "CUE Sheet Files (*.cue)"
 80524 = "All Sound Files (*.wav,*.mp3,*.aac,*.vqf)"
 80525 = "CD Information Files (*.txt)"
 80526 = "EAC Profiles (*.cfg)"
 80527 = "WAV, MP3, WMA, MPC and APE Files (*.wav, *.mp3, *.wma, *.ape, *.mpc)"
 80528 = "Binary CD-Text Files (*.cdt)"
 80529 = "The ASPI interface could not be initialized correctly !  (Error "

 80600 = "Audio CD in drive"
 80601 = "Track"
 80602 = "Playing"
 80603 = "Tracks"
 80604 = "No audio CD in drive"
 80605 = " Compression task left"
 80606 = " Compression tasks left"
 80607 = "Unknown"
 80608 = 10
 80609 = "User Defined Extension"
 80610 = "Wave Files"
 80611 = "External Compressor"
 80612 = "WM Audio Files"
 80613 = "Can't open/create the file \n\n"
 80614 = "No Profile Selected"
 80615 = "Play"
 80616 = "Pause"
 80617 = "Stop"
 80618 = "Previous Track"
 80619 = "Fast Back"
 80620 = "Fast Forward"
 80621 = "Next Track"
 80622 = "Eject"
 80623 = "Get CD Information From Metadata Provider"
 80624 = "Submit CD Information To Metadata Provider"
 80625 = "freedb Homepage"
 80626 = "Copy Selected Tracks Uncompressed"
 80627 = "Copy Selected Tracks Compressed"
 80628 = "Copy Image & CUE Sheet"
 80629 = "CD Title "
 80630 = "Album Title"
 80631 = "CD Artist "
 80632 = "Album Artist"
 80633 = " Various Artists "
 80634 = "Album Of Various Artists"
 80635 = "Year "
 80636 = "Production Year Of Album"
 80637 = "Genre "
 80638 = "Album MP3 Genre"
 80639 = "freedb "
 80640 = "Album freedb Genre"
 80641 = "Load"
 80642 = "Save"
 80643 = "New"
 80644 = "Delete"
 80645 = "Drive Selection Box"
 80646 = "Title"
 80647 = "Track"
 80648 = "Start"
 80649 = "Length"
 80650 = "Gap"
 80651 = "Size"
 80652 = "Compr. Size"
 80653 = "Read CRC"
 80654 = "Test CRC"
 80655 = "CRC"
 80656 = "Copy Protection"
 80657 = "Pre-Emphasis"
 80658 = 10041
 80659 = "Select WAVs To Compress"
 80660 = "The following files are not uncompressed 44.1 kHz "+
         "stereo WAVs !\n\n"
 80661 = "Do you still want to continue compression "+
         "without these files ?                     "
 80662 = "No files to process !                     "+
         "                                          "+
         "                                      "
 80663 = "Select Destination Directory"
 80664 = "Select WAVs, MP3s, WMAs or APEs To Decompress"
 80665 = "The following files are uncompressed 44.1 kHz "+
         "stereo WAVs !\n\n"
 80666 = "Select File To Rename From ID3 Tag"
 80667 = "Save Option Profile"
 80668 = "Load Option Profile"
 80669 = "The external compressor returned an error!\n\nOptions : "
 80670 = "\n\nFile : "
 80671 = "CD Performer "
 80672 = "CD Composer "
 80673 = "Comment "
 80674 = "CD Number "
 80675 = "Number Of CDs "
 80676 = "Artist"
 80677 = "Composer"
 80678 = "Lyrics"
 80679 = "Edit"
 80680 = "Add"
 80681 = "Select/Deselect all"

 80700 = "Illegal characters in profile name!"
 80701 = "Save DB Text File"
 80702 = "No General Music Style selected !"
 80703 = "Do you really want to delete this profile ?"
 80704 = "Profile deletion error!"
 80705 = "Configuration Wizard"
 80706 = "Save CD-Text Binary File"
 80707 = "Import Database"
 80708 = "     Read Error"
 80709 = "     Sync Error"
 80710 = "     Reading Selected Range"
 80711 = "     Reading Track"
 80712 = "     File Write Error"
 80713 = "     Cool Down Drive"
 80714 = "     Spin Up Drive"
 80715 = "     Continue Reading"
 80716 = "     Normalizing"
 80717 = "     Normalizing and Compressing"
 80718 = "     Test Done"
 80719 = "     Copy OK"
 80720 = " No CD Found"
 80721 = " Test canceled - Up to now NO C2 errors found"
 80722 = " C2 error information found"
 80723 = " Probably not C2 capable"
 80724 = " NO C2 errors found on this CD"
 80725 = " Can't find matching C2 read mode"
 80726 = " No audio tracks found"
 80727 = "Cutting"
 80728 = "Error writing file !"
 80729 = "File open error !"
 80730 = "Error in CUE sheet !"
 80731 = "Select WAV To Split"
 80732 = "Select CUE File Used For Split"
 80733 = "File not found in CUE sheet !"
 80734 = "CUE Sheets (*.cue)"
 80735 = "Wave Files (*.wav)"
 80736 = "Change Sample Value"
 80737 = "Changing Sample Value"
 80738 = "Select CUE Sheet"
 80739 = "The CUE sheet is either incorrect or does not "+
         "contain this file !  "
 80740 = "Save CUE Sheet As"
 80741 = "Do you really want to delete your current CUE sheet ?"
 80742 = "Probably not enough space for undo !\n\n"+
         "Do you want to continue without undo ? "
 80743 = "Save Waveform As"
 80744 = "Select WAV"
 80745 = "Open Replacement File"
 80746 = "No files"
 80747 = "Noise profiles (*.nrp)"
 80748 = 80735
 80749 = 80734
 80750 = "No enough space for undo !\n\n"+
         "Do you want to continue without undo, erasing all "+
         "undo levels ?    "

 80800 = "File write error !"
 80801 = "File creation error !"
 80802 = "Undo"
 80803 = "No temporary space available !"
 80804 = "Not enough memory for this operation !"
 80806 = "File read error !"
 80808 = "Clipboard file error !"
 80809 = "Incorrect input (-32768..32767) !"
 80810 = "Not a standard 44.1 kHz/16 bit/stereo WAV !"
 80811 = "Replace file too short !"

 80900 = "Position is beyond waveform limits !"
 80901 = "It is not possible to insert an index at this position !"
 80902 = "It is not possible to insert an index marker above "+
         "another marker at this position!"
 80903 = "It is not possible to insert an pre-gap marker above "+
         "another marker at this position!"
 80904 = "It is not possible to insert a pre-gap at that position !"
 80905 = "It is not possible to insert a track marker above "+
         "another marker !"
 80950 = "left "
 80951 = "right "

 81000 = "  missing sample"
 81001 = "  missing samples"
 81002 = "  repeated sample"
 81003 = "  repeated samples"
 81004 = " longer"
 81005 = "different samples"
 81006 = "Determine Peak Level"
 81007 = "Determining Peak Level"
 81008 = 410100
 81009 = "Comparing WAVs"

 81100 = "Compare WAVs"

 81101 = "EAC options"
 81102 = "Compression options"
 81103 = "Metadata options"
 81104 = "Options for drive "
 81105 = "WAV editor options"

 81200 = "     Searching Start Sector"
 81201 = " Testing..."
 81202 = " Test canceled"
 81203 = " Detect canceled"
 81204 = " Can't find matching read mode"
 81205 = " Lead In & Lead Out"
 81206 = " Only Lead In"
 81207 = " Only Lead Out"
 81208 = " None"
 81209 = " TOC reading error"
 81210 = " Searching..."
 81211 = " Searching Passage..."
 81212 = " Passage Not Found"
 81213 = " Read Error"
 81214 = " CD Not Found In Offset Database"
 81215 = " No CD Found"
 81216 = "   No Gap"
 81217 = "Track "
 81218 = "Detecting Gap Silences"
 81219 = "Extracting"

 81300 = "Once you confirm that your drive supports C2 pointers, "+
         "you can enable this feature in the drive options for this drive."
 81301 = "There was a problem of detecting the drive features "+
         "for this drive. Either no audio CD is in the drive, "+
         "or EAC couldn't detect a valid read mode. Please try "+
         "again or go back to the previous screen."
 81302 = "EAC couldn't find a CD in the drive to be tested. Make "+
         "sure a CD containing audio tracks is inserted in the "+
         "drive named on the top of the dialog. Please try again "+
         "or go back to the previous screen."
 81303 = "EAC found a CD in the drive, but it does not appear "+
         "to contain audio tracks. Make sure a CD containing "+
         "audio tracks is inserted in the drive named on the top "+
         "of the dialog. Please try again or go back to the previous screen."
 81304 = "EAC couldn't detect a valid read mode for this drive. "+
         "Either the drive is not supported or some manual "+
         "configuration is needed for this drive. Try again with "+
         "a different CD or go back to the previous screen."
 81305 = "Specified file is not found, please check your setting."
 81306 = "Select LAME Encoder"
 81307 = "Illegal email address!"
 81308 = "LAME Encoder (LAME.EXE)"

 81400 = "Current"
 81401 = "Select Default Path For Extraction"

 81500 = "CD-ROM drive selection box"
 81501 = "freedb Submission"
 81502 = "Invalid server address"
 81503 = "Only HTTP submission possible"
 81504 = " Done"
 81505 = " Canceled"
 81506 = "Get active server list"
 81507 = "Glitch Removing"
 81508 = "Select Command-Line Encoder"
 81509 = "Save Logfile"
 81510 = "Program files (*.exe)"
 81511 = "EAC Logfiles (*.log)"

 81600 = "This function will actually write data to your empty "+
         "CD-R/CD-RW !\n\nA CD-R can't be written again afterwards. "+
         "A CD-RW can be erased and rewritten though.\n\nDo you really "+
         "want to continue ?"
 81601 = "This CD is not empty !  "
 81602 = "Audio Files (*.wav,*.mp3,*.mpc,*.ape)"

 81700 = "L3Enc MP3 Encoder & Compatible"
 81701 = "Fraunhofer MP3Enc MP3 Encoder"
 81702 = "Xing X3Enc MP3 Encoder"
 81703 = "Xing ToMPG MP3 Encoder"
 81704 = "LAME MP3 Encoder"
 81705 = "GOGO MP3 Encoder"
 81706 = "MPC Encoder"
 81707 = "Ogg Vorbis Encoder"
 81708 = "Microsoft WMA9 Encoder"
 81709 = "FAAC AAC Encoder"
 81710 = "Homeboy AAC Encoder"
 81711 = "Quartex AAC Encoder"
 81712 = "PsyTEL AAC Encoder"
 81713 = "MBSoft AAC Encoder"
 81714 = "Yamaha VQF Encoder"
 81715 = "Real Audio Encoder"
 81716 = "Monkey's Audio Lossless Encoder"
 81717 = "Shorten Lossless Encoder"
 81718 = "RKAU Lossless Encoder"
 81719 = "LPAC Lossless Encoder"
 81720 = "User Defined Encoder"

 81800 = "TAO Gap Removal"
 81801 = "Removing TAO Gaps"
 81802 = "Select CUE Sheet for Gap Removal"
 81803 = "Only CD images can be processed (single file) !"
 81804 = "Only uncompressed files can be processed !"
 81805 = "Only uncompressed 44.1 kHz, 16 bit stereo files can be processed !"

 82000 = "CD cover"
 82001 = "Image dimensions : "
 82002 = "px"
 82003 = "Image size : "
 82004 = "kB"
 82005 = "First track number :"
 82006 = "Continue from last track number"
 82007 = "ID3 tag comment field"

 83000 = "Play CD"
 83001 = "Pause playback"
 83002 = "Stop playback"
 83003 = "Playback previous track"
 83004 = "Toggle fast backward"
 83005 = "Toggle fast forward"
 83006 = "Playback next track"
 83007 = "Eject CD"
 83008 = "Toggle cover view"
 83009 = "Display of cover image"
 83010 = "Get metadata from online database"
 83011 = "Submit current metadata to the selected metadata database"
 83012 = "Link to freedb website"
 83013 = "Extract selected tracks to WAV"
 83014 = "Extract selected tracks to selected compressed format"
 83015 = "Extract whole CD into a WAV image file and CUE sheet"
 83016 = "Open write CD dialog"
 83017 = "Save cover image to file"
 83018 = "Image file"

 84000 = "The test version of the GD3 metadata provider \n"+
         "was installed together with EAC. \nDo you want to use the 10 album "+
         "lookups test version \nas the current metadata provider? "
         